|
|
11-28-2012
So I've been browsing threw forms and I've seen all these different exhaust sizes and I have no idea what to do. I've seen the stock muffers are 2.25 and 2.50 I Just want to put a thrush glass pack on, a downpipe, mufflers and tips. I want to Just have it all welded in what sizes do I need? I want to keep all the stock pipes.
11-28-2012
Just about all the aftermarket mufflers for our cars sound terrible.
Magnaflow, flowmaster both drone like crazy. Only a select few sound okay at best.
Anyways, the pipe size is 2.25 from the catback flange to the Y, then from the Y its 1 7/8in pipe to the mufflers. So figure the mufflers are 2in ish.
11-28-2012
Do you think borla would have a good deep smooth sound to it? So 2.25 mufflers would work fine?
11-28-2012
I will tell you my magnaflows don't drone at all.
11-28-2012
Borla is the most expensive but i personally like them the best.
11-28-2012
What all do you have or do you just have the magnaflow mufflers?
11-28-2012
just mufflers, headers, 3 in dp, and not cat
11-28-2012
I have 2.25 from the cat back, all new pipe, 18" resonator, two turbo mufflers. No RASP, slight drone at low speeds and sounds awesome WOT. Just go to youtube and look up exhaust samples and if you have a subwoofer on your comp then you can get a better sound judgement.
11-28-2012
what brand mufflers? and is that stock res size? I might just get borla mufflers and leave the rest.
11-28-2012
Borla FTW
11-28-2012
This guy is telling the truth!Originally Posted by DanPrixGTP
11-28-2012
Would i speak anything other than the truth?
11-28-2012
I dont think ill regret going with some borla!! but would i have a better sound with a resonator or thrush glasspack?
11-28-2012
Ehh choice is yours.
I would personally go with a cherry bomb or thrush glasspack.
The longer the pack, the less drone but more quite it is.
The shorter the pack, more drone but louder exhaust.
Find a happy medium, pick your poison.
11-28-2012
Ok now would a 2.25 inlet/outlet fit in?
11-28-2012
Yes sir.
With a 2.25 in/out you can clamp it to your exhaust.
Its not that big of a deal if you get a different size, you can weld together two different sizes, but if your only trying to clamp together and not weld, you need exact dimensions, which in your case is 2.25in
11-28-2012
Alright thanks man you've helped me out ALOT! Thank you so much!
11-28-2012
No problem kind sir.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
