|
|
09-26-2013
I'm getting close to making some time to polish up my car. I've got a Porter Cable 7424 along with Meguiar's M105 and M205 polishes. I've seen in several different right ups that after using these, you should just get a good wax and apply that but then I've also seen people mention applying a sealer, glaze, wax, etc... I've never done this before but I would like to do this the right way. Does any one have suggestions or tips on exactly which product would be good to use?
Thanks
09-26-2013
I stuck with Meg's.
You can either try Yellow #26 (which I've had GREAT luck with)...
Or, whatever sealer wax you prefer...honestly. I always did the high speed with the cutter and used a orbital lower speed for the finish.
Always seemed to be easier that way and never used to give that "haze" you'd get sometimes.
This car was done back when I still just had a random low speed orbital, with a swirl remover and the yellow #26 glaze. Ryan's car always looked awesome clean.
http://www.grandprixforums.net/showthread.php?t=18803
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
