I just got some LED tails with a few minor scratches on them. Anyone know what to use to get these out? Thanks.
|
|
08-19-2013
I just got some LED tails with a few minor scratches on them. Anyone know what to use to get these out? Thanks.
08-19-2013
wet sand 2-3k grit
buff
polish
wax
might be able to just buff them out
08-19-2013
pics of scratches?
08-19-2013
ThisOriginally Posted by Ginseng
08-19-2013
I have looked all over different forums and google results and everyone is saying different things. Many have said that plastic polish and elbow grease might do the trick. I was just seeing what you guys think. I can snap some pictures tomorrow maybe.
08-19-2013
They look tits regardless. I would just like to see if I can make them just a little better
08-19-2013
If they are not too bad you can use meguiars M105/M205 combo. It's easier if you have a dual action polisher. If not you will have to do it by hand with a little elbow grease. If they are bad than the following procedure posted is what you will need to do.
08-21-2013
I have looked into a little more and seems like everyone recommends Novus 1,2, and 3 products for scratch removal and polishing. Has anyone ever used this stuff?
08-21-2013
M105/205 Is my go to products
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
