I have those on my front and it puts the car way too low to the ground for where i live it causes the frame to be scraped any ideas on how to help resolve that issue???????
|
|
05-27-2010
I have those on my front and it puts the car way too low to the ground for where i live it causes the frame to be scraped any ideas on how to help resolve that issue???????
05-28-2010
put the stock springs back in? how are you supposed to remedy lowering springs...
05-28-2010
It causes your frame to scrape what tires are you running.. I mean dont get me wrong I have the same setup and cant get up my drive unless I back in sideways but just driving around dont have a problem. Dont even have a problem with speed bumbs as long as I take it slow.
05-28-2010
i have the stock in, i have the stock tires on it, but im shopping for aftermarket ones to see if that will help with a low profile tread???
05-28-2010
i know for the tires are to big bc it hitting my wheel well wen i go slow over bumps
05-28-2010
Are these used parts? You have the anti-pogo washers? You replace the strut mounts when you had this installed? Mine are old and I don't bottom out, only if the angle is more then like 40* angle, but thats why I still have my trailer hitch.
by stock I assume 225/60/16?
I'm running 245/45/17's no probs with rubbing
05-28-2010
I have them mounted on gas shocks and my stock are on quick strut for fast removal and easy installation I take a pic of them to show
05-28-2010
I am sooooo lost on this!!! Wtf
05-28-2010
this is why i havent bought lowering springs, i have new gr-2's with new mounts but i dont wanna lower it because you have to drive slow all the time lol i see all the lowered cars out there it doesnt look fun, but damn does it look good
05-28-2010
i added the picture of the spring and strut to my album ill lower it in a week and tak apic to show how low it sits
05-28-2010
Originally Posted by shawngtp
Yeah I am right there with you....!!
05-29-2010
So is your body scraping on the road or are the tires rubbing?
Originally Posted by TLSheff
05-29-2010
no ****Yeah I am right there with you....
dude, theres no ferkin way your sub frame is htting the ground, unless your riding on brake rotors
05-31-2010
i sure as hell never had any problems getting anywhere, including through a foot of snow.
06-02-2010
put a picture of my car lowered in my album
06-03-2010
how often are you scraping your frame? just avoid those roadsthe car looks too good lowered!
06-03-2010
i will be attending the PA meet so you will be able to see it in person
06-03-2010
sweeet! sounds good
06-03-2010
Huge problem! i did my safty check that i do before road trips and just found out that my control arm is bent and i have to replace them time to order the ZZP racing control arms. So now i cant attend as soon as it gets fix i will attend a meet
06-03-2010
nooo its fine just drive itif you didnt notice anything with how it drives then it fine!! haha
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
