Thread: Anyone run torque arms? Looking for good traction/torque steer reduction mods...

Results 1 to 13 of 13
  1. #1 Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Anyone run anything of the sort? I'm not running a high HP/TQ motor but i've noticed on my car that not only do I not have low end traction (which is no surprise), but it torque steers like crazy, almost pulling me in other lanes. I can handle it, its not a big deal but I want absolute full control of it. My A-arm bushings are good and have been replaced before, ball joints should be good although I plan on redoing those in the future, struts/mounts are all newer, i'm pretty confedent my front suspension is up to par.

    Only ideas I have so far is some sort of torque arm setup like Thrashers , and some sort of LSD. The GM is way more than I'm willing to spend for something not 100% perfect. The only half way decent ones i've heard of is the EP diff but I hear there quite difficult to get.

    Looking for ideas, thanks!
    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  2. #2 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    I live here. UR LOSN's Avatar
    Join Date
    Dec 2007
    Location
    Rockford, IL
    Posts
    5,796
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I like the thrasher kit.

    Wbody store quit running their modified A arms as they werent cost effective.

    ZZP has had failures with their tubular A arms...

    I know SDD was working on some this past year.. but havent heard anything else about them.
    2001 GTP- PT76 turbo, Intense Drag cars old engine, Stage 4 Intense turbo cam,FMIC,150 wet,Double roller timing chain,Diamond forged coated pistons 8:0:1,Diamond piston rings,Cryoed L32 connecting rods,Cryoed crank,Clevite77 main bearings,Clevite77 cam bearings,Clevite77 L32 rod bearings,ARP Everything, Intense/meizere true billet Flexplate,Intense Wilson UIM/LIM,Intense oil pressure kit,Cometic,OE-R lifters,Cryoed L67 block,ATI turbo dampner,80# inject,Weldon 2035 fp,Aero Fuel Rails,AL cradle
    Reply With Quote  
     

  3. #3 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    DUI BABY Bio248's Avatar
    Join Date
    Jan 2008
    Location
    MILWAUKEE
    Posts
    31,340
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    your car torque steers really bad? ive never had that problem..
    Reply With Quote  
     

  4. #4 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    club of used to own a gp 99prixgt's Avatar
    Join Date
    Jun 2008
    Location
    Jersey
    Posts
    4,643
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I have alot of torque steer from a stop and a 10-15 mph roll, and my car is slow.
    16' wrx sti- stock
    06 Spice Red GTO- m6/exhaust/tune/suspension/377whp-383tq-sold
    99 silvermist gp gt-g5/xp/IC/3.0mps-parted&sold
    Reply With Quote  
     

  5. #5 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    DUI BABY Bio248's Avatar
    Join Date
    Jan 2008
    Location
    MILWAUKEE
    Posts
    31,340
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    really? i can do a 3-1 downshift and mine only jerks a little bit. i think you guys have suspension problems.
    Reply With Quote  
     

  6. #6 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    TDCRacing
    Guest
    I don't have it too bad...but it's there....Sorry I don't have any advice for you Shawn
    Reply With Quote  
     

  7. #7 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Suspension problem is not likely in my case, i've done everything over time, including A-arm bushing which I bet most people are still on there originals. My car handles and rides tight, you'd never guess the mileage.

    I noticed it more with the 3.29s and the 3000 stall. I've got a bit more low end power now and its noticable. With the little bit i've mess with on a couple of tweaks, traction is way worse...
    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  8. #8 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    club of used to own a gp 99prixgt's Avatar
    Join Date
    Jun 2008
    Location
    Jersey
    Posts
    4,643
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Bio248 View Post
    really? i can do a 3-1 downshift and mine only jerks a little bit. i think you guys have suspension problems.
    well i got mostly new parts and the car handles pretty well for a boat.

    -new control arms both sides
    -new gr2 struts w/ ssc springs and all new hardware
    -new tie rod end

    torque steer is better but not enough to say barely any...

    I just ordered 2 new inner and 2 new outer tie rods, hopefully thats the weakest link.
    16' wrx sti- stock
    06 Spice Red GTO- m6/exhaust/tune/suspension/377whp-383tq-sold
    99 silvermist gp gt-g5/xp/IC/3.0mps-parted&sold
    Reply With Quote  
     

  9. #9 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    DUI BABY Bio248's Avatar
    Join Date
    Jan 2008
    Location
    MILWAUKEE
    Posts
    31,340
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    hm, maybe im just not driving my car as hard as you guys.
    Reply With Quote  
     

  10. #10 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    Donating Users chico's Avatar
    Join Date
    Dec 2007
    Posts
    167
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    here is set I made
    04 gto stock,97 GPGT l-36 block diamond pistons ,l-32 rods ,custom comp cam grind,HS 1-7 RR, p&p heads, SS IC,SS M-90 3.5" ,4t60eHD,from Gonzales TX.
    Reply With Quote  
     

  11. #11 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    Donating Users chrisb's Avatar
    Join Date
    Jun 2008
    Location
    Bucyrus, OH
    Posts
    404
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    interesting, does it help much?
    99 Grand Prix old build- CAI, Custom exhaust, HV3, Stage 2 TB, custom tune, ported heads intense s1x cam, headers.
    Nothing great Just a small T66 Turbo with a Hv3 On a stock tranny untill i finish the other one.
    Reply With Quote  
     

  12. #12 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    GXP Level Member Iron Indian's Avatar
    Join Date
    Dec 2007
    Location
    Moore, Oklahoma
    Posts
    2,619
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by chico View Post
    here is set I made

    Parts list? Price? Does it help? Looks like Thrasher Torque Arms to me, they look great!
    Shawn W. Larsen

    2005 Pontiac GTO 6.0 LS2/A4... Stalled/Cam Only: 406 RWHP , 370 RWTQ

    Reply With Quote  
     

  13. #13 Re: Anyone run torque arms? Looking for good traction/torque steer reduction mods... 
    Donating Users chico's Avatar
    Join Date
    Dec 2007
    Posts
    167
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Yea they help,as far as parts I just ordered rod ends from summit and some 3/4" heavy wall pipe from Tractor supply alittle measuring a little welding and viola trac bars ,cost of parts about $50 ,I did change the front mount setup from the picture as I was having a little clearance issue instead of the mounting bracket facing down they now face side ways old II new = .
    04 gto stock,97 GPGT l-36 block diamond pistons ,l-32 rods ,custom comp cam grind,HS 1-7 RR, p&p heads, SS IC,SS M-90 3.5" ,4t60eHD,from Gonzales TX.
    Reply With Quote  
     

Similar Threads

  1. i need torque specs
    By MTXGTP in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 2
    Last Post: 07-20-2008, 12:14 PM
  2. Looking For Some Torque Specs.
    By stlmo_gtp in forum General Tech Discussion
    Replies: 4
    Last Post: 07-10-2008, 02:58 PM
  3. Torque anyone?
    By Trannyman95 in forum Off Topic Discussion
    Replies: 6
    Last Post: 06-18-2008, 10:20 AM
  4. torque..?
    By GP2003GT in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 5
    Last Post: 06-03-2008, 11:13 PM
  5. Torque specs
    By kstanko in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 2
    Last Post: 03-31-2008, 12:47 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •