Thread: ABS Unit and brake bleeding

Page 1 of 2 12 LastLast
Results 1 to 20 of 21
  1. #1 ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    May 2010
    Location
    canal winchester, ohio
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I disconnected the master cylinder from the booster and the 2 lines going to the ABS unit. I also disconnected one of the brake lines off the ABS unit. Then it hit me.....When do you have to do the special bleeding procedure for the ABS unit? When I get my car back together can I just bleed it like I would any other car?

    Thanks. I love Ohio and road salt!
    Reply With Quote  
     

  2. #2 Re: ABS Unit and brake bleeding 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you need to bleed the master. best to bolt it all back up, then fill the res then pump the brakes like you would for a caliper, but you crack the line nut off the master to let the air out. repeat till you hear no more air. then do the other line, then go about doing the brakes.

    i wrap a rag around the line nut and wrench too, keeps the fluid from flying.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    Apr 2016
    Location
    Maryland
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Have someone else pump the brakes and hold them down while you open then close the line all the while them not letting go of the brake pedal.
    Reply With Quote  
     

  4. #4 Re: ABS Unit and brake bleeding 
    GTX Level Member cheatah faheatah's Avatar
    Join Date
    May 2016
    Location
    Rouge Island
    Posts
    1,109
    Thanks (Received)
    3
    Likes (Received)
    12
    Dislikes (Received)
    0
    You can "bench bleed" your master in a vice. I have a kit I think came with a new master years ago, its 2 plastic threaded fittings that have a hose barb and a couple short pieces of clear plastic tube. You loop the tubes back up into the master under the fluid and watch until no more bubbles come out as you cycle the master with a punch or screwdriver or whatever.....
    For the record : I am NOT a naked meth-head who shoves rocks up my butt.
    Reply With Quote  
     

  5. #5 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    May 2010
    Location
    canal winchester, ohio
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks for the comments. I did what I never do and took the car to a shop 1/4 mile up the road. I got fleeced but it will be done today. 1 brake line...$300. I have replaced brake lines before (I still have my tube bender) but I just couldn't get under the car in that corner and was kinda of sick of screwing around with cars so I punted. Oh life would be so much easier with a lift.

    The CV axle will be easy to redo compared to getting access to that damn brake line. While under the car I took a hard look at my cradle bolt bushings and they look good. I still don't know what my creaking is in the front end. That will be after the CV axle.

    If anyone is ever in Columbus I will buy you a beer for the help.
    Reply With Quote  
     

  6. #6 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    May 2010
    Location
    canal winchester, ohio
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Repeat after me "Never take your car to a chain repair shop" Say it again "Never take your car to a chain repair shop"

    They attached the new line to the sway bar with a zip tie, never really bled the system, and forgot to repair 2 other lines they were going to repair. They also cross threaded the ABS unit. They pretty much suck. I ended calling the manager back and took it back for them to fix. What a joke. I knew better. Repeat after me "fix your own stuff", again "Fix your own stuff"
    Reply With Quote  
     

  7. #7 Re: ABS Unit and brake bleeding 
    GTX Level Member cheatah faheatah's Avatar
    Join Date
    May 2016
    Location
    Rouge Island
    Posts
    1,109
    Thanks (Received)
    3
    Likes (Received)
    12
    Dislikes (Received)
    0
    Can you tell us which chain? Midas?
    For the record : I am NOT a naked meth-head who shoves rocks up my butt.
    Reply With Quote  
     

  8. #8 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    Apr 2016
    Location
    Maryland
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Wow.....just wow! The only reason I ever take my vehicle to a shop is to get tires mounted and balanced and a front end alignment. If I knew someone that had a tire machine I would only go to get them balanced and alignment
    Reply With Quote  
     

  9. #9 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    Apr 2016
    Location
    Maryland
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Also please spill the beans which company
    Reply With Quote  
     

  10. #10 Re: ABS Unit and brake bleeding 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    damn. they took money for this work?

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  11. #11 Re: ABS Unit and brake bleeding 
    I can't car too good. SaukRapids's Avatar
    Join Date
    May 2016
    Location
    MN
    Posts
    1,054
    Thanks (Received)
    3
    Likes (Received)
    3
    Dislikes (Received)
    0
    Terrible.. just, ugh. Suck.

    Sorry for your bad time.
    Reply With Quote  
     

  12. #12 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    Apr 2016
    Location
    Maryland
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I would have gotten my money back and went somewhere else to get it fixed and then whatever the difference was for having to pay the new shop I would have charged the old ****ty shop. And if they wouldn't pay it would threaten them with a lawsuit. If I were you I definitely would not have let them even look at my vehicle
    Reply With Quote  
     

  13. #13 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    Apr 2016
    Location
    Maryland
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Great picture by the way
    Reply With Quote  
     

  14. #14 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    May 2010
    Location
    canal winchester, ohio
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    https://m.facebook.com/NTBSUCK/

    I knew better. Anytime I have paid someone do a repair for e I have been disappointed.

    I really didn't want.them to do it again but I owe them the chance.to make it right.....let's hope they don't put something in my crankcase to pay me back....I never complain about my food at a restaurant for.that very reason. Luckily I have another car. I bet women and uneducated guys get ripped off left and right.

    In 2012, just before I went to Afghanistan, I changed the oil, transmission fluid, brake pads, air filter, wipers on my wife's 2010 Kia van with 30k miles on it. The week after I left the 2.5 year old battery died and she got it towed to the dealership. $1500 later I had another oil change, transmission flush, new tires, new battery (the only thing needed), cabin air filter, etc, etc. So in the big scheme of things, this wasn't that bad.

    Still pissed because I wanted to work on my axle instead screwing with brakes still.

    Thanks guys
    Reply With Quote  
     

  15. #15 Re: ABS Unit and brake bleeding 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    nice rep they got.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  16. #16 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    Apr 2016
    Location
    Maryland
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    As long as your cool about it and talk to the mechanic who did the work and who is about to do the work. Most places will fix their wrong.
    Reply With Quote  
     

  17. #17 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    May 2010
    Location
    canal winchester, ohio
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Just picked up the car from ntb. They fixed the line, another 2 lines, and re bleed it. I still wasted good money paying someone but at least it is done so all is good.
    Reply With Quote  
     

  18. #18 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    Apr 2016
    Location
    Maryland
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Good to hear you finally got it fixed properly as far as you can tell
    Reply With Quote  
     

  19. #19 Re: ABS Unit and brake bleeding 
    SE Level Member
    Join Date
    May 2010
    Location
    canal winchester, ohio
    Posts
    147
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    So I bled the car today. Gravity bled it. I still have a spongy pedal that goes to the floor slowly (the car stops still). Brakes are hard with the motor off and the pedal stays hard. Start the car and it sinks to the floor. Any tips are appreciated.

    Background:
    -blew brake line.
    -in effort to fix the line myself I took off the master cylinder and also unhooked one line from the ABS unit
    -took it to a shop
    -got it back, they said they bled it but it was spongy so I re-bleed it.
    -I used some old brake fluid I had in my cabinet. It could have been 6 years old. Wouldn't think it would matter but maybe it does.

    I am going to rebleed it and use the 2 man method.

    Is there any chance my brakes are spongy because of me unhooking the line to the ABS unit?
    Reply With Quote  
     

  20. #20 Re: ABS Unit and brake bleeding 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    you need to bleed the master first like stated in post #2. then do each brake caliper.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

Page 1 of 2 12 LastLast

Similar Threads

  1. Bleeding brake system with ABS?
    By VicRDE82 in forum Brakes/Suspension/Chassis
    Replies: 2
    Last Post: 04-18-2016, 09:54 AM
  2. brake bleeding question
    By EHB in forum Introductions/Noob Questions
    Replies: 28
    Last Post: 01-02-2015, 10:14 PM
  3. Bleeding a 3.1L
    By Matt Beauchamp in forum 3.1L V6 (LHO/LG8)
    Replies: 5
    Last Post: 05-13-2012, 04:37 PM
  4. Brake Bleeding Procedure
    By SJAndrew in forum Brakes/Suspension/Chassis
    Replies: 1
    Last Post: 08-12-2010, 06:20 PM
  5. 1992 Grand AM Brake Bleeding help
    By rmacinc in forum Brakes/Suspension/Chassis
    Replies: 8
    Last Post: 01-23-2009, 09:51 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •