A few notes....
1) Don't use 1W resistors. They are physically to large to work in the small space in the switch.
2) Don't use 15* LED's. The viewing angle is to narrow and don't illuminate the switch very well.
Now to go get some more parts. :)
Printable View
A few notes....
1) Don't use 1W resistors. They are physically to large to work in the small space in the switch.
2) Don't use 15* LED's. The viewing angle is to narrow and don't illuminate the switch very well.
Now to go get some more parts. :)
if you shave off the rounded point you will get a more even light though out the switch.
I used SMD LEDs instead of trying to combat the view angle.