|
|
05-10-2010
I have a 2003 Grand Prix GT. It came with a standard steering wheel. I'm looking to replace it with one that has the radio controls. I did it with my 94 Grand Prix SE, and it was just a matter of swapping the steering wheel and clockspring and wiring it up to the block under the steering column. Is the procedure the same for my 03?
Any thoughts?
05-10-2010
its just replacing the harness then mounting the RF transmitter probably around your centre console so the HU can pick up the signal.
05-16-2010
Did the swap. Was pretty easy. Swapped steering wheel and clockspring. Already had the harness to plug into under the steering column!
Now waiting for my PACSWI-PS and Humount to arrive. Will post pics when done!
06-01-2010
Finished the interior setup. Installed steering wheel, clockspring, wired to factory plug under kickpanel.
Original setup with aftermarket head unit (Pioneer DEH-P5100UB) and generic mount.
Humount installed.
Big Red.
06-01-2010
Does it still stick out like a fat pig with the HUMount? I'm guessing not, but hard to tell with the cool night pic.
06-01-2010
no it dose not it sits flush
06-07-2010
I like the light up grand prix gt thingy where you get it and what is it?
10-04-2011
Old thread...but how do you get the clockspring out?
10-05-2011
wanna come do mine cuz i dont want to deal with it
SMGPFC #77
10-05-2011
I figured it out...gotta use a puller in order to get the wheel off. then the clockspring comes out.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
