Thread: Growing DIC

Results 1 to 6 of 6
  1. #1 Growing DIC 
    GT Level Member Hurricane87's Avatar
    Join Date
    Jul 2016
    Location
    Brevard County, FL
    Posts
    404
    Thanks (Received)
    2
    Likes (Received)
    7
    Dislikes (Received)
    11
    It's not actually growing, but it no longer fits where it belongs.

    The DIC wouldn't stay in place after my accident. I looked inside the fascia, and thought it was because two tabs were snapped off. I ordered another. I attempted to put it inside the new one, but it doesn't fit. the presence of the tabs keeps the display from snapping into place. (It would go into place on the other fascia, it just fell afterward.) In addition, there's now a two inch gap between the fascia and the rest of the dashboard.

    I'm starting to think the previous owner deliberately snapped off the tabs to make it fit. There are four screws at the bottom which will hold it in place. If I don't get an answer from someone, I think I'm going to break things myself.

    I can provide pictures if needed.
    Reply With Quote  
     

  2. #2 Re: Growing DIC 
    GT Level Member Hurricane87's Avatar
    Join Date
    Jul 2016
    Location
    Brevard County, FL
    Posts
    404
    Thanks (Received)
    2
    Likes (Received)
    7
    Dislikes (Received)
    11
    Bump....
    Reply With Quote  
     

  3. #3 Re: Growing DIC 
    GT Level Member mguzzo's Avatar
    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    483
    Thanks (Received)
    8
    Likes (Received)
    27
    Dislikes (Received)
    0
    maybe after your accident the unibody is messed up and things aren't fitting right.
    --
    "Silver Bullet" 98 GTP Coupe: Stock, rust free, and broadsided.
    Old '98 GTP Coupe: VS Cam, 3.0, S2IC, 42.5#, TOGs, N*/LQ4, Corsa. it once ran a 13 flat
    Older '98 GTP Sedan: Pullied, rockered, SSIC, etc. Stock 14.33 @ 96.5 / PB: 13.89 @ 101
    Reply With Quote  
     

  4. #4 Re: Growing DIC 
    GT Level Member Hurricane87's Avatar
    Join Date
    Jul 2016
    Location
    Brevard County, FL
    Posts
    404
    Thanks (Received)
    2
    Likes (Received)
    7
    Dislikes (Received)
    11
    Quote Originally Posted by mguzzo View Post
    maybe after your accident the unibody is messed up and things aren't fitting right.
    Please don't take this as disrespectful or whatever else you guys call me, but how does unibody damage (which was limited to the radiator support anyway) affect the interaction of interior plastic trim pieces? Just trying to understand....
    Reply With Quote  
     

  5. #5 Re: Growing DIC 
    GT Level Member mguzzo's Avatar
    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    483
    Thanks (Received)
    8
    Likes (Received)
    27
    Dislikes (Received)
    0
    none taken, but quite frankly when I hear that dash pieces don't line up and there's a 2 inch gap, I'm thinking that something is whacked. If you have pictures put them up.
    --
    "Silver Bullet" 98 GTP Coupe: Stock, rust free, and broadsided.
    Old '98 GTP Coupe: VS Cam, 3.0, S2IC, 42.5#, TOGs, N*/LQ4, Corsa. it once ran a 13 flat
    Older '98 GTP Sedan: Pullied, rockered, SSIC, etc. Stock 14.33 @ 96.5 / PB: 13.89 @ 101
    Reply With Quote  
     

  6. #6 Re: Growing DIC 
    GT Level Member Hurricane87's Avatar
    Join Date
    Jul 2016
    Location
    Brevard County, FL
    Posts
    404
    Thanks (Received)
    2
    Likes (Received)
    7
    Dislikes (Received)
    11
    Figured it out. The DIC had two copper things still attached to it that came out of the broken tabs on the original fascia. The newer fascia also had them. Remove one set, screw the screws that were attaching them to the DIC into the other set, and voila!

    What I still haven't figured out is, what the purpose of using copper in a place where no electricity flows is, or what the purpose of using TWO DIFFERENT SIZE Torx screws was.
    Reply With Quote  
     

Similar Threads

  1. Just to confirm the pulley size with my current growing list of junk
    By ls6velless454 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 17
    Last Post: 04-18-2010, 07:10 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •