Activity Stream

I'd go with the shift kit first. Since you have to drop the pan to install it will guarantee you get about 6 quarts of fresh fluid into it and a new...

I'll pass on some info that is pertinent to the UIM/LIM job that I always use. It's the bolt tightening pattern and torque specs for the LIM and...

​Mechanic came by today and im leaking coolant from upper intake gasket everywhere and some from lower. So gonna replace those and thermastat and see...

Well its 2025 and my 2001 GPGT 3.8 has just started to shift hard between 2-3 and 3-OD... First to second is very smooth. I fixed the OD problem by...

Welcome back! Yes, we need to add more W-body owners back on here, it's a bit quiet, but still going.

Sorry hear about the demise of your '08....

McLaren seem unbeatable this season. At this rate they are going to win both Championships with multiple races remaining in the season.

thanks. yeah i figured if i ever figured out what the problem is and i get it fixed then i would get the coolant flushed ASAP! Tomorrow or tuesday i...

I will say this, take a look at the "front" of the engine (the pulley side). If you can follow where the lower intake meets the front head and you...

I just googled lower intake manifold gasket symptoms and that sounds like exactly what is happening literally. And because of that is whats creating...

If the boots are leaking, then you need a new rack. Do-able on your own if you have jackstands. There is a how-to here. It's not fun, but not...

I think it is the rack. About 3 years ago i could put power steering fluid in and it stay in for about 2-3months and slowly leak out. Now my fluid...

Have you ever changed the trans fluid/filter on it? If not you could try that. A trans-go shift kit could alleviate the 1181 max adapt shift issue....

Would or could a shift kit fix this problem? If so would a trans shop be able to do this under $1k you think?

I read somewhere that the car could be in "limp mode" from the trans code. But when the car started doing this it was the end of december and...

Ok, let's sort through these. p0107-click the link--> P0107 p0125- Check the connection to your coolant temp sensor. Replace sensor if wiring...

codes i have... p0107 p0125 p0128 p0302 p0336 p0420 p0442 p0751

You could hook it up there, that nipple is behind the throttle body blade so it would fill the entire upper intake and so on. If you post the...

could someone please move this to the general grand prix discussion?

So nobody on here knows where to insert smoke test tube into engine to run a smoke test on here? Seriously? Maybe i posted in the wrong place?

Nah. You can replace just the level sensor. The clips and wire connections can be a little fiddly, but it's very doable. Some guys will say to just...