What should I be reading at wot or moderate throttle? I know what the hz should be but the torque pro app reads in g/s. Thanks!
If it matters mods are zzp pcm, 3.2, headers, intake, 3 inch catback and 104s
|
|
06-13-2015
What should I be reading at wot or moderate throttle? I know what the hz should be but the torque pro app reads in g/s. Thanks!
If it matters mods are zzp pcm, 3.2, headers, intake, 3 inch catback and 104s
06-13-2015
that pulley is too small if those are all your mods.
my maf flows anywhere from 140 to 311 g/sec
06-13-2015
You can also set it to CFM.
06-13-2015
I've got a 3.4 also. Only showing maybe 2 degrees of kr with the smaller pulley.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
