Is a stock plug on an 04 gapped at 55-60 to much for n/a
|
Is a stock plug on an 04 gapped at 55-60 to much for n/a
Haven't had time to take sc belt off ,driving it runs fine I give it have throttle or more it sputters idels fine I can get up to speed fine but once I give it gas it cuts out no check engine light either
Double check your plug wires, make sure they're seated on the plug all the way. Make sure you feel that "click" on each one as you push it on. Pretty good chance your problem is with plugs and/or wires, they can be bad right out of the box, when you can scan for misfires, swap the misfiring cylinders plug for one that's not missing and see if it follows the plug. If not, swap the wire, that'll tell you which one is the culprit. Without that scanner you're shooting in the dark, though.
I mean scanning for misfires, you don't always get a P03XX code, I never did in my Regal that was missing like a bastard. I scanned each cylinder for misfires with my scanner, hopefully the one you got with the torque app can do that too.
« Previous Thread | Next Thread » |