Is a stock plug on an 04 gapped at 55-60 to much for n/a
Printable View
Is a stock plug on an 04 gapped at 55-60 to much for n/a
Chip??
Haven't had time to take sc belt off ,driving it runs fine I give it have throttle or more it sputters idels fine I can get up to speed fine but once I give it gas it cuts out no check engine light either
Double check your plug wires, make sure they're seated on the plug all the way. Make sure you feel that "click" on each one as you push it on. Pretty good chance your problem is with plugs and/or wires, they can be bad right out of the box, when you can scan for misfires, swap the misfiring cylinders plug for one that's not missing and see if it follows the plug. If not, swap the wire, that'll tell you which one is the culprit. Without that scanner you're shooting in the dark, though.
There's no check engine light tho if I scan it'll show nothing
I mean scanning for misfires, you don't always get a P03XX code, I never did in my Regal that was missing like a bastard. I scanned each cylinder for misfires with my scanner, hopefully the one you got with the torque app can do that too.
The bluetooth I got is paired but won't connect I've had no luck with app or bluetooth
Any info on getting bluetooth to connect would be awesome
That didn't help lol
you need to set up GM pids. that trheads walks you through that.
to unlock the bluetooth 0000 1234 one of those should unlock it.
I've done all that
so whats it not doing?
I can pick up the bluetooth obd2 it will pair but will not connect think it's a bad scanner I'm gonna have them ship a new one
sucks, what elm did you get? a mini? some have had issues with them.
It's the elm327 regular size
does it say advanced bluetooth something on it? thats the one i got.
i got this one.
https://encrypted-tbn1.gstatic.com/i...SBUnjKnET-bHcg
Got a fuel pressure tester gonna check tonight and scan for kl codes maybe change maf