Future Build

[shaneh17]

I'm looking to start modding my GTP lightly. Gonna go with a 3.5 pulley, ZZP tune, catted down pipe, TB spacer, and other little supporting mods.
Is there anything other vital mods I need to consider? Thanks.

[GMR Badass]

skip TB spacer......if mechanically inclinded I'd suggest a set of rockers and then call it a day. You'll enjoy the few extra ponies without having the expensive transmission issues.

[Below Average Joe]

Read this before you mod. Lots of good info in here....

http://www.grandprixforums.net/threa...00-Powered-Car!!

[Below Average Joe]

Listen to what he said lol

[SnowTh1ef]

Would also HIGHLY recomend at least a power log if not headers if you want to run a pulley that small.. front manifold is the biggest issue.

[shaneh17]

Thanks guys.

[shaneh17]

Definitely going to consider this, thanks!

[chrsmi1]

Where are you at in nc?

[DirtDog]

Another from NC. Howdy

I'm 2 hours from Raleigh

Sent from my HTC6525LVW using Tapatalk

[Flip97GTP]

Read this before you mod. Lots of good info in here....

http://www.grandprixforums.net/threa...00-Powered-Car!!

Yea I agree! After I read that thread I decided I was going to do a LIM gasket replacement because the gasket that's on there now is the plastic crap and I think it's gone bad anyways.

Anyways, there is a lot of useful info in that thread and is a must read, if you are thinking about doing some serious mods to the engine.

Also, some headers would be a suggested mod.

[94GrandPrixSE]

Headers ftw loose that stock restricton.

[nos4blood70]

Headers > Dp/plog combo