|
|
12-07-2013
Had anyone heard of a VSC 2002 Cam? I bought one last year used after being told that it was a VS cam. After having issues tuning, I discovered that it was a different cam. I found another one for sale on an old thread here: http://www.3800pro.com/forum/sale/39...6-000-9-a.html
I would just like to learn more about this cam and who sold these new so that I can get an ideal tune.
Sent from my SCH-I535 using Tapatalk
12-07-2013
It's not the cam that's causing your tuning issues. Lol
12-07-2013
Thanks for your help.
Sent from my SCH-I535 using Tapatalk
12-07-2013
So, it's an XP with a different name?
Yeah...sounds like there is other things going on...
supporting mods? got a live feed scan of it?
Who tuned it?
12-07-2013
It's more like a VS with higher exhaust lift. I will get a live feed scan asap.
Sent from my SCH-I535 using Tapatalk
12-07-2013
isn't that the one anthony smith has?
12-09-2013
Nope, mines a 76-802-11 .512/.512 264/274
12-09-2013
What issues are you having.. it would help better to understand why you think a cam could ever cause a "tuning problem" more so than seeing what a scan looks like.
12-09-2013
I haven't been tuning it myself. The real backstory is that I own a powrtuner, yet know nothing about tuning. I bought a canned tune from one of the popular pcm vendors recently in order to give myself a good baseline from which to learn. The car did not run as strong with the new pcm in it (took forever to go from 1700-4500 rpm and saw higher knock). I have been running my original, close to stock pcm since then and haven't had time to swap the aftermarket computer back in to scan it again.
Sent from my SCH-I535 using Tapatalk
12-09-2013
Have anyone local or within reason that can do a in car tune for you instead of a box tune.
12-11-2013
It wouldnt be worth doing an "in car" tune most likely.. If you have a DHP just set the injector table so your car runs right and drive it.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
