I will be installing these soon and want to do this correctly the first time.
I will be using comp reusable rocker bolts,
zzp 6.95"-5/16" pushrods (i just bought 7.05" stock length, but zzp says that will be too much preload for LS7 lifters.
i have cometic .052" head gaskets, which is .010" thinner
heads are milled .005"
stock rockers
stock valves
nic cam
do i set lifters on base circles or does it matter if they are open or closed with these engines? Then after that, what about preload. what torque + * of turn
Thanks in advance
