wEnt toNapa and got 6 605 autolote coppers and went to install them and I can't sseen to get the boot or that metal thing to come off. I tried twisting and pulling and they won't nudge at all . Anyone have any tips or tricks. Thank you
|
|
07-01-2013
wEnt toNapa and got 6 605 autolote coppers and went to install them and I can't sseen to get the boot or that metal thing to come off. I tried twisting and pulling and they won't nudge at all . Anyone have any tips or tricks. Thank you
07-01-2013
Push the silver boot toward the engine..then you'll have more boot to grip.
07-01-2013
Is it okay if the metal and boot seperate ?Originally Posted by BillBoost37
07-01-2013
take them metal boots off and toss them in the trash, then rip the rubber boot off the plug, wearing leather gloves will protect your hands when you do the twist and rip to get them off. it takes some pulling, but they will come off.
its when the boot breaks free you need/would like to have gloves on cause your hand will fly when it breaks free.
as long as your putting new wires on you can pull, twist grab with pliers, cut the boot side, what ever to get them off, as they are going in the trash anyway.
07-01-2013
Yes, those metal sleeves are junk anyway, dont re-install them.
07-01-2013
I reinstall on stock setups.. it helps with heat on the boots.
07-05-2013
man i spent a good two to three hrs swapping out my plugs and wires finally got them off i dont think the previous owner ever changed their wires just grip with pliars and pry with flat head
07-05-2013
I did my bfn three in ten minutes with a spark plug boot removal tool . Basically a pair of long needle nose and the ends like circular and at. A 45°
07-08-2013
My 04 was the same way. 67k and all original plugs and wires. I got the front three pretty easy. The back 3, I broke 2 of the plugs so I could save the wires!
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
