Re: will i have problems with a vs cam if idont have a tune?
Quote:
Originally Posted by
blueguy
Most of the time it won't trip it because it's such a small lift based cam.
random misfires have nothing to do with lift. a 600 lift stock cam would run without the code setting.
Quote:
If P0300 sets on you, it'll limit things and screw with how it runs.
It doesnt "screw" with it, it just eliminates misfire detection. Sometimes it may eliminate knock detection.
There is no breakin required, your motor is only going to last a few hundered miles anyway, so i wouldnt waste the time getting it "tuned".
Re: will i have problems with a vs cam if idont have a tune?
Your always so negative ^. Why not back up your negativity. Say because of X, Y will happen. Then they can figure out how to fix or beef it up.
Re: will i have problems with a vs cam if idont have a tune?
Quote:
Originally Posted by
darkhorizon
random misfires have nothing to do with lift. a 600 lift stock cam would run without the code setting.
It doesnt "screw" with it, it just eliminates misfire detection. Sometimes it may eliminate knock detection.
There is no breakin required, your motor is only going to last a few hundered miles anyway, so i wouldnt waste the time getting it "tuned".
ya thanks alot... tell me how my motor is only going to last a few hundred miles if you know so much.
