Okay guys and gals. I need to know what all of you are doing if or when the fill hole bolt to the blower gets stripped out. The hex portion, not the threads. Mine is stripped and I couldnt get the thing out. I used an easy out to get the thing out. Fortunately I have a spare complete blower so I just took the bolt from the spare and put it on the car.
I found out the bolt threads are 7/16-20 x 1/4 or 3/8" long. I went around town and the only bolts I could find like that were hex caps that were 3/4" long minimum. I can work with that and Im pretty sure I could get an Oring on there that would seal things up nicely it just wouldnt necessarily look as good, I dont think anyway.
Does anyone else have any ideas or suggestions? Have any of you tried a better option or are you just buying a replacement bolt from somewhere? Farnsworth, if you see this, since you rebuild the nose drives Id be really interested in what you view is.
