Thread: Airbag light, wheel controls, horn doesn't work.

Results 1 to 9 of 9
  1. #1 Airbag light, wheel controls, horn doesn't work. 
    GTP Level Member buck531's Avatar
    Join Date
    Aug 2011
    Location
    Gahanna, Ohio
    Posts
    603
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    I bought this 98 GTP that had a bad trans. Pulled motor, swapped trans, put the car back to stock. Everything runs fine except:

    Air bag light on, cruise doesn't work, steering wheel controls don't light up (or work) and the horn doesn't work.

    The brake lights work, wipers, turn signals, brights/headlights work fine.

    I thought it might be the turn signal switch in the column. I don't think that's it because everything worked fine before I pulled the motor/trans.

    I've checked the fuses and connectors under the dash where the harness plugs in for the switch.

    When I pulled the motor/trans I didn't drop the cradle. Everything came out the top and the steering was never disconnected. Before I go to pick n pull to get a switch what else can I check? Grounds? Where?
    03 GS - SSAC, AEM wb, PT,SR rockers, Gen 3, 3.4, dynotech trans w/ 3.29's.

    87 Fiero GT. L67 Swap. XP, ported heads/sc. N* TB, FSIC, 2.8, 12.018 @ 113 1.71 60'.
    Reply With Quote  
     

  2. #2  
    ... osiris94ej's Avatar
    Join Date
    Sep 2012
    Location
    Casper Wyoming
    Posts
    511
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I'd say clock spring or in the wiring to the clock spring.

    Sent using Tapatalk 2 from my GS3.
    Reply With Quote  
     

  3. #3 Re: Airbag light, wheel controls, horn doesn't work. 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,997
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    id think clock spring as well. the horn, could be the wires under the air bag, the wires under the hood to the horn, or the horn its self is dead.

    either way the steering wheel needs to come off to get to the clock spring.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  4. #4  
    GTP Level Member rperry435's Avatar
    Join Date
    Oct 2011
    Location
    MI
    Posts
    1,181
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    X2 on the clockspring.

    Sent from my SPH-L710 using Tapatalk 2
    '04 CompG - 3.6MPS - 104s - FWI - TOGS - w/14"SlimFans - SLP RR' s - 180HF Stat - TEP SK - Aluminum Oil Pan - 4thGen ZZP Wires - LS7 Lifters - AeroForce - AEM WB - HPTuners - FBSS Air Ride
    ASE & State Certified Auto Electrical Tech
    Reply With Quote  
     

  5. #5 Re: Airbag light, wheel controls, horn doesn't work. 
    GTP Level Member buck531's Avatar
    Join Date
    Aug 2011
    Location
    Gahanna, Ohio
    Posts
    603
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Changed the clock spring. No go. Horn doesn't work on the wheel but when I hit the lock button twice it blips. I found the steering wheel control issue which was a fuse I must have missed.

    Checked the relays, Kinda stuck. Any other ideas?
    03 GS - SSAC, AEM wb, PT,SR rockers, Gen 3, 3.4, dynotech trans w/ 3.29's.

    87 Fiero GT. L67 Swap. XP, ported heads/sc. N* TB, FSIC, 2.8, 12.018 @ 113 1.71 60'.
    Reply With Quote  
     

  6. #6 Re: Airbag light, wheel controls, horn doesn't work. 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,997
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    the 2 wires from the air bag were plugged in? the long black one that you push in the column and twist, and the one that sits on a stud?

    for the abs light, next step is to look under your front seat, see if you have a yellow plug, if so open it, clean it put it back, if that dont fix it, under the pass seat, and then under the rug is a air bag module, it was the cause of my air bag light. i changed it and the light was off instantly.

    my guess is if the cowl leaks, the floor gets wet and over time kills the module.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  7. #7 Re: Airbag light, wheel controls, horn doesn't work. 
    GTP Level Member buck531's Avatar
    Join Date
    Aug 2011
    Location
    Gahanna, Ohio
    Posts
    603
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Awesome. I'll have to check that out tomorrow. I'm done being in the garage today. I'm selling the car. I just want to get rid of the air bag light.

    Yeah the wires from the air bag were plugged in and the one that twists. Still stumped on the horn.
    03 GS - SSAC, AEM wb, PT,SR rockers, Gen 3, 3.4, dynotech trans w/ 3.29's.

    87 Fiero GT. L67 Swap. XP, ported heads/sc. N* TB, FSIC, 2.8, 12.018 @ 113 1.71 60'.
    Reply With Quote  
     

  8. #8 Re: Airbag light, wheel controls, horn doesn't work. 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,997
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    i got my car cheap because every light on the dash was lit up lol, all in all it cost under 100 to turn them all off. that air bag module goes for as cheap as 20 or as high as 40, or in your tool box real easy at a pick and pull yard. where mine came from.

    funny i just saw where your from. (my module came from ohio, from another member snatched it up for me)

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  9. #9 Re: Airbag light, wheel controls, horn doesn't work. 
    GTP Level Member buck531's Avatar
    Join Date
    Aug 2011
    Location
    Gahanna, Ohio
    Posts
    603
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Yeah I was just at the yard on Friday to get the clock spring. Didn't know about the air bag module
    03 GS - SSAC, AEM wb, PT,SR rockers, Gen 3, 3.4, dynotech trans w/ 3.29's.

    87 Fiero GT. L67 Swap. XP, ported heads/sc. N* TB, FSIC, 2.8, 12.018 @ 113 1.71 60'.
    Reply With Quote  
     

Similar Threads

  1. Horn doesn't work, any help?
    By hockeybawler in forum General Tech Discussion
    Replies: 14
    Last Post: 10-10-2012, 10:30 PM
  2. Replies: 3
    Last Post: 08-16-2012, 02:20 PM
  3. FAQ doesn't work
    By Jakescoots in forum Forum Bugs/Suggestions
    Replies: 6
    Last Post: 04-23-2011, 10:41 AM
  4. Airbag cluster light? ABS/Trac light too?
    By oddwraith in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 16
    Last Post: 08-15-2009, 09:57 AM
  5. howto make Steering wheel controls work???
    By timmaayy2323 in forum Audio, Security & Visual Electronics
    Replies: 2
    Last Post: 05-16-2009, 03:04 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •