Thread: Super cheap intercooler build. Running total $275

I looked him up and searched through 7 pages of threads but didn't see anything about a golf rad.

I read that but it didn't say anything about a golf rad. I'll go jy hunting this weekend sometime if the wife allows it lol

the pics are gone....booooo.

26.63"x12.63"x1.25" core
1.25 inlet & outlet size

So I would need reducers to make it fit the hose from the ic right?

iirc, he had the fittings on the inlet and out lets of the rad that he plumbed to the lines to the core.

it was a sharp looking install.

Hopefully mine turns out the same lol

Buying a pump very soon and I think I found a golf rad at the jy i commonly go to. Probably only be about $15-$20 Then all i have to do is buy hose and make gaskets up.

Well thats cheaper than making gaskets lol. Yay cheap stuff

I'm getting a fmhe and pump for $125 shipped so i'll add that to the total once i pay. Then all I need is hoses and I have to figure something out for the fuel rails.

FMHE and pump will be getting shipped to me soon Anyone have any suggestions for super cheap fuel rails?

Get some L67 and cut the stock fuel line and use a braided hose and a flange etc....

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

Originally Posted by scottydoggs

the pics are gone....booooo.

I know they aren't needed anymore but after a little playing (learned how to properly navigate PhotoBucket after getting lost in BillBoost's for 3 days) I found these. Not the best but some of his shots from the GP Intercooler Install among the 4 pages of old cars

Past Vehicles and Toys pictures by topdeadcenterracing - Photobucket

Originally Posted by REDCOMPG

Get some L67 and cut the stock fuel line and use a braided hose and a flange etc....

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

Too much caring.

We used brake booster hose and clamped it on Jarred's car too...along with the fitting hose clamps under the snout for the cooler lines.

Fire hazard?

Sure, but that's what insurance is for and he never had any fueling problems

Can't wait to see this setup finished. Stuff will be shipped out 2moro after work. BTW, are you gonna use RTV instead of Garleaks? I know I did, lol.

Undecided on gasket right now. Cutting fuel rail and double clamping has worked for over a year by my fuel filter so i may go that route.

^^^Would luv to chime in & say, "I haz fuel logs" but, mine seem to have disappeared...