Thread: Need help ticking video up

so i started getting a ticking noise a couple months back. Im thinking its coming from the sc bearings. It seemed to happen right after i changed the sc oil that hadnt been changed by previous owner. Is there anyway to test this 100% like disconnect the sc? Anyway here is the vid

Originally Posted by acidcrashdburnd

Does it get louder as you accelerate? probably your coupler.

ZZPerformance - Supercharger Coupler #ZZ-SCCPLR,

it does seem to get louder as i slowly increase throttle,(although really hard to tell cus the loudness of the car)
but my original question is there a way to disconnect the supercharger so i can atleast narrow it down to that and just pull and p&p

Another thing to mention i have disconnected the belt and tested any play in pully and there doesnt seem to be any at all

the car runs without that belt like it doesnt connect to anything else?

ok i took the belt off sc and the sound was still there posting another video

although with the belt off you still couldnt tell if it was the sc or not cus i noticed the sc still ran when i gave it gas, right?

ok so then my next step would be to take the valve covers off and run the car to see if i can locate the problem?