Was your #4 wire really tight across the SC body, and almost the same length as the #2 wire? Mine is laying right up against the SC housing, and if it weren't for the wire seperators, it would be laying on the SC housing.
Loud
|
|
06-30-2012
Was your #4 wire really tight across the SC body, and almost the same length as the #2 wire? Mine is laying right up against the SC housing, and if it weren't for the wire seperators, it would be laying on the SC housing.
Loud
Last edited by loudimpala; 06-30-2012 at 02:03 PM.
06-30-2012
try running them under the snout.
06-30-2012
Tried that. Because it's gotta come back up and over the bracket in the back, it's still too short.
Loud
06-30-2012
Whats wrong with them laying on it?
They wont burst into flames.
07-02-2012
Number 4 should be the longest wire. Pull them off...you should have one back one that is longer.
07-02-2012
LOL, plug brackets.
LOL@routingoverthesupercharger.
Remove that alternator bracket, that might help you too.
07-02-2012
Remove....c'mon. I leave that baby there.
07-02-2012
Yeah, if it's that tight, then you might need to lay the back 3 out and check for the longest.
Under the snout is the only way to go.. Route them like this and win
07-02-2012
Back when I had prj wires the back three were all equal length. Same with the fronts. They must have changed things around a tad in the last 4 years
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
