L32 map/baro sencor

[xBlacKxGTPx]

o i am getting some codes and im lost...the car will start up and idle fine untill it gets warm then starts to run like crap then dies. any input would be appreciated. the question here would be is there a resistance on these sencors that i could check before buying another 100$ part?

[] P2228 - Barometric Pressure (BARO) Sensor Circuit Low Voltage
[] P0069 - Manifold Absolute Pressure - Barometric Pressure Correlation (Immature)
[] P0107 - Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage (Immature)
[] P1107 - Manifold Absolute Pressure (MAP) Sensor Circuit Intermittent Low Voltage (History) (Immature)

[FONT='lucida grande', tahoma, verdana, arial, sans-serif]
[/FONT]

[BillBoost37]

The correlation seems to be talking about the two map sensors. Ensure they are both plugged in and the correct one has vacuum from the LIM. Maybe try swapping the two plugs.

[xBlacKxGTPx]

so if im unserstanding what you are saying i have to have both plugged into the vac system? i though on was fo barmetric pressure (atmospheric pressure) and the other was for the manifold absolute pressure witch would be vacuum system. correct me if i am wrong.