throttle position sensors are non adjustable, although your pcm threw the code for your tps meaning its reading 0% throttle response. Insted of getting a new tps there is a relearn for your tps
Turn ignition key to on (but don't start engine) and leave it for 10 seconds, then turn it off for 10 seconds.
Then push the pedal down as far as it will go, turn ignition key back to on for 10 seconds again, then turn key off, then release pedal and wait another 10 seconds.
Repeat this 2-3 times to make sure it's got it. If you have a scanner you can verify it. With the ignition on and foot off the pedal it should now read 0% throttle, then push it down and the percent should rise until you are at 99-100% at WOT position
the sensor itself is non adjustable, but the pcm needs to know what is 100%
