|
|
03-28-2011
So... this O2 sensor cable is short, like really FVCKING SHORT! I was wondering if someone could show me how they have their LC1 routed to compensate for the length.
I was told not to cut wires because they are stainless.
Also, extensions are not available.
Originally Posted by W-Body Store
03-28-2011
There is a drain plug that is under the passenger floor mat that u punch out through the bottom then cut hole in carpet thats how i ran my LC1 O2 Senor
03-28-2011
Ahh, so you just left the "brain" under the car?
Originally Posted by W-Body Store
03-28-2011
No the wire should be long enough to go through the hole. then u connect it inside the car
03-28-2011
So you ran the O2 down the hole? I'm just trying to picture how it would go with the size of the clips.
Originally Posted by W-Body Store
03-28-2011
Ill shoot ya a txt
03-28-2011
That box that the O2 sensor connects to is weatherproof. It belongs outside the car.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
