was able to get about 4 hours on the Dyno with the Night students in the High Performance Powertrains. The Orignal Dyno with no tuning on a 3.1 pulley put down 273.72 whp and 301 TQ
I was able to let the car cool and do alot of tuning inbetween, and of course scanning.
Mods on the car
3.0 Pulley
Gen V
Phenolic IC
60 lb injectors
SLP headers
3" catback
we were not able to get a tach signal anywhere on the car. Tried a plug wire, ICM harness, and even the balancer. NOTHING would read. SO only HP numbers.
I gained 20WHP by swapping from a 3.1 to a 3.0 pulley with out any tuning.....
final results are 302.98 WHP
enjoy the sweet Gen V 3.0 Whine
videos :: 11-18-10dynotuning.mp4 video by 1993SLE4 - Photobucket