What Headers Do You Guys Recommend??

I have pacesetters. Love em. They have a better y-pipe these days so fitment is better. They're using a go-no-go gauge on the y pipe to check it and make adjustment for the slip fit joints.

thanks man and 01gtp get bent :)

Quote:

---

Originally Posted by GTPJOE90

thanks man and 01gtp get bent :)

---

no joe, you should do some reading. this topic has come up many, many times and the headers have been shown to be just fine. don't tell someone to **** off when you didn't make a single effort at searching about something that has been debated to death.

http://www.grandprixforums.net/f49/o...now-29835.html
http://www.grandprixforums.net/f18/b...ion-31428.html
http://www.grandprixforums.net/f81/h...tml#post296755
http://www.grandprixforums.net/f18/l...ent-26647.html

I prefer the 4th one. Thank you Nick.

Here is a thanks.

Quote:

---

Originally Posted by GTPJOE90

01gtp get bent :)

---

try using the search button ya fekkin ignant tool

Quote:

---

Originally Posted by bluegtp91

I prefer the 4th one. Thank you Nick.

Here is a thanks.



try using the search button ya fekkin ignant tool

---

Yeah I just read that whole thread and about 4 pages of nonsense about o2 sensor. Why wouldn't you just put the o2 emulator or just have the rear o2 deleted.

I wonder if they're back in stock yet?

Quote:

---

Originally Posted by bluegtp91

Must be that Washington air. Your car sounds like sh!t...I don't even have to hear it to know it is rasp city.

---

Zero rasp here, I left the stock res in and no rasp. But think what you want buddy ;)

Quote:

---

Originally Posted by footballplaya3k

Zero rasp here, I left the stock res in and no rasp. But think what you want buddy ;)

---

then youre not straight pipes. you chopped off the mufflers and now you have a nasty sound anyway, even if its not raspy.

Quote:

---

Originally Posted by bluegtp91

I prefer the 4th one. Thank you Nick.

Here is a thanks.



try using the search button ya fekkin ignant tool

---

I could have posted more links, but I got lazy.

LOVE TOGS here.

My SSAC's are great and pretty easy to install once you remove the Trans Dipstick. But I do not like the Ticking that the Flex Gives if you go with these I would get a different Flex and have it welded in before install.

Welcome to the world of slip fit headers mang

My speed daddy headers just came and all looks good. the welds are very nice. i will repost once i get them in.

they look exactly how they are shown and are stainless, the only thing i couldnt figure out is the clamps, i would see about the bands. i have these but were bought used. no issues.

Quote:

---

Originally Posted by cleangtp

Yeah I just read that whole thread and about 4 pages of nonsense about o2 sensor. Why wouldn't you just put the o2 emulator or just have the rear o2 deleted.

I wonder if they're back in stock yet?

---

from what i understand 01+ cars cant have o2 deleted, can only be set to non report... car will run really rich if its deleted.

Quote:

---

Originally Posted by gtpinsc

from what i understand 01+ cars cant have o2 deleted, can only be set to non report... car will run really rich if its deleted.

---

Right...so since cleangtp claims to know SO MUCH he should know that its a big issue for the '01+ cars...it'll throw the fuel trims way off and like what was said ^^ run REALLY rich. I used an emulator until I got tired of the 12 mpg's average. Put a rear o2 in it this time around...

Quote:

---

Originally Posted by bluegtp91

Right...so since cleangtp claims to know SO MUCH he should know that its a big issue for the '01+ cars...it'll throw the fuel trims way off and like what was said ^^ run REALLY rich. I used an emulator until I got tired of the 12 mpg's average. Put a rear o2 in it this time around...

---

Clean doesn't care because clean has a 98 ftw:th_thumbsup-wink::th_laugh-lol2:

How many full engine builds have you done again?

One?

Think you lost that one...since no one has ever tired to make a joke out of that one. Got ourselves a funny guy here.

I ran an 02 emulator on my 01 and pulled 29.5 on the high way.

Installed my speed daddy headers today. Took about 5 hrs including welding in a cat. No leaks and look great.