OK fellas....I got the new IAT's built over the weekend, and here are a few tests we ran. They consisted of putting them in front of a space heater to simulate a heat soak if you will, also to have a constant starting temperature. Hit it with a can of compressed air to chill them down, then back in front of the space heater just to demonstrate the sensitivity and range of the sensors. The next test was to chill them with the compressed air again, then see how long it would take to return to ambient temperature on their own. The modified sensors clearly recovered faster than the stock ones did.
Also a side note, I'll also add that the modified ones are extremely sensitive to temp change....so much as moving them around in the air and even slightly breathing on them caused variations in temperature....so they're deffinately sensitive enough.
Now the discussion on if they're worth it or not, I'll let you guys be the judge....Sorry about it being in Celsius, try not to bust my balls too bad.
