Thread: Parts for converting an L26 to a supercharger

Page 1 of 2 12 LastLast
Results 1 to 20 of 27
  1. #1 Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    So I have asked for last year about belt drive parts. So no one has ever shown a picture of the lower idler that's down by crank pulley. I know about the upper mount with tensioner and idler. But since far that lower one I can't get a good look at, any offered for sale or where to get one. Three times I have tried to buy the drive parts and three times the deals fell through and sellers never get back to me. I have the zzp converted intake so I can bolt up to non SC heads. And still debating on injector size. Supposedly local station is getting E85 and E100. Already have non E10 90 octane.
    Guess could call zzp and get the single belt pulley. But had hoped to make it look stock.
    Reply With Quote  
     

  2. #2 Re: Parts for converting an L26 to a supercharger 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,972
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    This is it.

    [IMG][/IMG]

    Is that all you're looking for?


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  3. #3 Re: Parts for converting an L26 to a supercharger 
    GTP Level Member CHI2000GTP's Avatar
    Join Date
    Dec 2015
    Location
    Chicago, IL
    Posts
    821
    Thanks (Received)
    4
    Likes (Received)
    45
    Dislikes (Received)
    1
    ^^ What is going on in that photo? Is that pulley and bracket just resting on an open LIM? Making me dizzy LOL. Your confusing the hell outta the guy with that photo.

    But yes. That is the idler and bracket that's by the balancer (crank) pulley. One of the 3 bolts go through the water jacket. Pisses coolant everywhere.
    Reply With Quote  
     

  4. #4 Re: Parts for converting an L26 to a supercharger 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,972
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    It's a picture I found that someone posted. It is kind of trippy.


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  5. #5 Re: Parts for converting an L26 to a supercharger 
    GTP Level Member CHI2000GTP's Avatar
    Join Date
    Dec 2015
    Location
    Chicago, IL
    Posts
    821
    Thanks (Received)
    4
    Likes (Received)
    45
    Dislikes (Received)
    1
    It is trippy. Haha. Almost looks Photoshoped on there. Almost looks likes its bolted on the way its placed on that LIM.
    2000 GTP 4DR - Stock
    243,000 miles
    CHICAGO, IL
    My Car: http://www.grandprixforums.com/members-rides/103740-lukes-gtp.html#post1443981
    Reply With Quote  
     

  6. #6 Re: Parts for converting an L26 to a supercharger 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,152
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Quote Originally Posted by MonzaRacer View Post
    Three times I have tried to buy the drive parts and three times the deals fell through and sellers never get back to me.
    If you'd like, I can pick one up when I'm at the junkyard this weekend? I can't imagine they'd charge more than say $10-15, and it's pretty light, so shipping shouldn't be bad either.
    Reply With Quote  
     

  7. #7 Re: Parts for converting an L26 to a supercharger 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    if you do, grab the bolts too for him too. them bolts in the n/a block just dont seem to be good enough. they also might not be long enough. i tossed mine and used the bolts off the l67 when i swapped it over.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  8. #8 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by wstefan20 View Post
    If you'd like, I can pick one up when I'm at the junkyard this weekend? I can't imagine they'd charge more than say $10-15, and it's pretty light, so shipping shouldn't be bad either.
    Well heck yeah, and if car is 04 up and has appropriate bracket/mount for upper idler and tensioner would be great. I'll just pick up the tensioner assortment I found locally , guy has both of the after market o e with different percentage and a new stock one also for $50 . I tell ya that darn unit is a biotch to find. At least here in Indiana where I live. I've had a low miles gen V zzp intake and rails, the other stuff is just pure hell in southern Indiana. To locate. Found guy who was selling g engine trans complete ,till saw car had been hit I. Right front and engine trans were junk. Even broke blower in middle and broke like 4 or 5 injectors and it was low miles 07 L36!!!!!!
    Reply With Quote  
     

  9. #9 Re: Parts for converting an L26 to a supercharger 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,152
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Quote Originally Posted by MonzaRacer View Post
    Well heck yeah, and if car is 04 up and has appropriate bracket/mount for upper idler and tensioner would be great. I'll just pick up the tensioner assortment I found locally , guy has both of the after market o e with different percentage and a new stock one also for $50 . I tell ya that darn unit is a biotch to find. At least here in Indiana where I live. I've had a low miles gen V zzp intake and rails, the other stuff is just pure hell in southern Indiana. To locate. Found guy who was selling g engine trans complete ,till saw car had been hit I. Right front and engine trans were junk. Even broke blower in middle and broke like 4 or 5 injectors and it was low miles 07 L36!!!!!!
    Owch! Yeah, grand prix's are like water here in Kansas City. There's always at least 60 in the local junkyards even with turn around of one month! And yeah, that's not a bad price for the tensioner. I switched to the camaro tensioner awhile back so I could upgrade to the CS144 alternator and haven't looked back! I'll pm you this weekend with pics!
    Reply With Quote  
     

  10. #10 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Wow typed balancers in phone and it changed word to tensioners!?! Crazy autocorrect guy has the 5% 10% and STD diameter BALANCERS ALL FOR $50 . Yeah read about alternator upgrades but been toying with removing decoupling pulley and rewire it so regulator controls Alt with no computer control at all. just trying to gather parts for blower install before new engine hits 100k(installed 69 k engine 20k+ miles ago. And been trying g to save some cash for when built trans comes my way or parts to build one. I can do it just prefer to drop one in. For $630 in car, traded work for $350 engine w 6 month warranty it's been great. Gotta do some repair at rad support due to rust but rest of car is ok. Oh and rad needs swapped out, have new schedule rad, and will need heater core before winter but all in owning 04 w 200k+ miles.
    Reply With Quote  
     

  11. #11 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey did you make it to any junkyards if not no big but would appreciate if you could find those supercharger drive parts. 6 day a week and no good local jy sucks, 100 mile round trip to hit u pulls. Thanks
    Reply With Quote  
     

  12. #12 Re: Parts for converting an L26 to a supercharger 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,152
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Quote Originally Posted by MonzaRacer View Post
    Hey did you make it to any junkyards if not no big but would appreciate if you could find those supercharger drive parts. 6 day a week and no good local jy sucks, 100 mile round trip to hit u pulls. Thanks
    Strangely, there weren't many gtps there and the ones that did either had bad pulleys or were crushed so you couldn't get to them without pulling the entire engine! Good news for you though is that I found someone parting out a gtp here who is selling me the entire engine so I'll just give you that pulley since I won't need one for a while and they are usually abundant around here. Hopefully all goes as planned and I'll be picking it up thursday and I'll let you know!
    Reply With Quote  
     

  13. #13 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    So would it possibly have the upper mount the tensioner and other pulley goes on and the coils bolt too? If not or your using it I have another source possibly. And it turns out I will have the three harmonic balancer powerbond makes the 5%10% and stock diameter if he comes over this weekend.
    Reply With Quote  
     

  14. #14 Re: Parts for converting an L26 to a supercharger 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,972
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    Where did you find a 10% powerbond?


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  15. #15 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by GTPpower View Post
    Where did you find a 10% powerbond?
    Local guy buys and sells from estate sales, had three if them in box no one wanted to buy at his flea market booth. So we chatted and he wanted some Chevy parts so offered him trade(of which I have about $50 in) so hoping he co.ea through.i mean there is like $500+ worth on all three balancers
    Reply With Quote  
     

  16. #16 Re: Parts for converting an L26 to a supercharger 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,972
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    Do they work though? Powerbond never made a 10% OD balancer for the 3800 to my knowledge.


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  17. #17 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Well I know I looked them up and there was STD, performance and then a 5% and 10% but either STD or performance was discontinued or limited availability. I'll look up numbers again. Used to have it all wrote down.
    Reply With Quote  
     

  18. #18 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Reply With Quote  
     

  19. #19 Re: Parts for converting an L26 to a supercharger 
    GXP Level Member GTPpower's Avatar
    Join Date
    May 2008
    Location
    Schuyler, NE
    Posts
    2,972
    Thanks (Received)
    8
    Likes (Received)
    23
    Dislikes (Received)
    0
    It's a 10% underdrive? That's the only one I see at that link.


    2001 GTP Drag Car - XPZ, Tischler heads, Upsidedown M90 IC'd, e85, Gen V, 2.3 w/ 5%OD
    2005 F350 6.0 - studded, deleted, tuned
    2001 GTP - cam, headers, nitrous, stock trans - 11.83 @ 116 <$2k in mods - sold
    Reply With Quote  
     

  20. #20 Re: Parts for converting an L26 to a supercharger 
    GT Level Member
    Join Date
    May 2016
    Location
    Burns City, Indiana
    Posts
    155
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Still hoping someone can source me the part like one in picture above. And also need the coil bracket that holds the tensioner and other idler.
    I am hoping to soon be able to make aftermarket pedestal but want stick one to reference from. Seems all SC cars around in jy u can pull parts at are stripped. I just installed new rad as mine was ****. Figured out had to trim about 1/4" all around as sc rads take different fan setup. I will say the 1800radiator kit I got through work was awesome, new rad, hoses clamps and cap all in one box and I even got package of candy(thier little gimick) all for $135ish! Had to go through work as I am using payroll deduction. But let me say when car ran with temp couple notches above half it cooked 23.6 mpg, now back with stock tstat it's back to low 20s. I will see what new wires and plugs do as it was 69k engine but is at/over 100k now. But man it loved little warmer running temps. If I could swap to Evanscooling coolant I'd try to run her at around d 225 all the time. Tuned buddy's race car at 230 with Evans coolant, and it loves extra heat, especially when he hammers NOS. 300 port shot and 225 plate system is LOT of NOS. Comes back with sweaty intake and carbs.
    Reply With Quote  
     

Page 1 of 2 12 LastLast

Similar Threads

  1. Supercharger parts
    By 1BadGT in forum General Grand Prix Discussion
    Replies: 18
    Last Post: 11-06-2014, 10:02 PM
  2. Supercharger rebuild parts
    By Silver GTP in forum General Tech Discussion
    Replies: 0
    Last Post: 04-29-2010, 06:19 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •