Thread: 3.5 pulley and plugs ?

I did a search and didn't really don't what i was looking for but in just installed my zzp 3.5mps when for a quick test drive( man did it make a difference can only imagine with a tune) and running autolites 606 with zero KR. I ordered a set 104s but got sent 103s. My mods are sd headers with 3" catless down pipe, stock catback, fender well cone filter and 180t stat.

From what i understand is that 103 are 2 ranges colder and typically used with more mods?

Would it hurt any to run the 103s or should i use 104s? Or would i be okay with the 606s since I'm getting no KR?

Sent from my E6810 using Tapatalk

Cool thank you,. I'll drive it around like this for a few days and see how it goes.

Sent from my E6810 using Tapatalk

Well did a few pulls this morning on my way to work and got a 1st gear spike of 2.9 KR,. Zero 2nd gear. I tried a few more pulled and stayed at zero KR let off at 80.

Sent from my E6810 using Tapatalk

It looks like I'm getting small spikes of 1 to 2 KR in first at part throttle. So I'm gonna throw in some 104s but i noticed with the 3.5 pulley I'm only hitting 6-6.5psi,. I know that having headers and intake can lower psi but does that sound kinda low?

Sent from my E6810 using Tapatalk

I don't think you need that cold of plugs for a 3.5 pulley with your mods. What kind of gas are you running? It's better to stick with hotter plugs than to go directly down to 104s, but I guess as long as you don't get any misfires with them, it's fine...

91, that's all that's available in my area.

Sent from my E6810 using Tapatalk

Yea, in could try. In have a new set of 103s.
I noticed that in the morning I'm getting no KR,. Temp is prob low to mid 60s. But after work temp is low to mid 90s and that's when i get the 1 to 2.5 KR spikes.

Sent from my E6810 using Tapatalk