Almost done with top swap, but in serious need of help

Quote:

---

Originally Posted by Bio248

why did you send out the l67 TB when you could have went at it with a dremel for an hour and done it for free. if youre going to buy a throttle body or pay for one you might as well get a northstar then.

---

I'm getting the L67 TB ported for $50. Worth it since I don't have a place to do it right now. I also feel he'd do better work than I.

suppose that works. as long as it is worth it to you.

$50 is chump change compared to all the other stuff I'm getting. Worth it, seeing how a N* setup or LS1 is much more expensive and probably not necessary.

Quote:

---

Originally Posted by Bio248

why did you send out the l67 TB when you could have went at it with a dremel for an hour and done it for free. if youre going to buy a throttle body or pay for one you might as well get a northstar then.

---

because its a MAP sensor problem too. The MAP sensor for that throttle body is different. The engine is from a 98 bonneville. I would have to have custom tables put in the PCM and as stated before, I have a canned tune from ZZP. I also dont have the tools to do it. If you want pictures, I can show you why they are different and why I cant use the L67. I cant use one of the newer sensors in it either.

Quote:

---

Originally Posted by sickofsoyo

because its a MAP sensor problem too. The MAP sensor for that throttle body is different. The engine is from a 98 bonneville. I would have to have custom tables put in the PCM and as stated before, I have a canned tune from ZZP. I also dont have the tools to do it. If you want pictures, I can show you why they are different and why I cant use the L67. I cant use one of the newer sensors in it either.

---

Not MAP sensor. MAF sensor. MAP sensor is different.

Quote:

---

Originally Posted by Sabrewings

Not MAP sensor. MAF sensor. MAP sensor is different.

---

yes lol, I had the map sensor next to me when I was typing, putting that on soon

Quote:

---

Originally Posted by sickofsoyo

because its a MAP sensor problem too. The MAP sensor for that throttle body is different. The engine is from a 98 bonneville. I would have to have custom tables put in the PCM and as stated before, I have a canned tune from ZZP. I also dont have the tools to do it. If you want pictures, I can show you why they are different and why I cant use the L67. I cant use one of the newer sensors in it either.

---

30 minutes with a saw, and dremel fixed that problem, and let me run the 99+ maf in my 98 TB..... Let me dig up the pics

After porting w/ dremmel tool...I wish I had taken more pics.....

http://i266.photobucket.com/albums/i...p/HPIM0258.jpg

Oh, and here it is whit the 99+ MAF

http://i266.photobucket.com/albums/i...p/Image026.jpg