So I have looked around and not seen many do it, actually none. I am going to be polishing the aluminum on the l26 uim. So stay tuned for lots of pics
|
So I have looked around and not seen many do it, actually none. I am going to be polishing the aluminum on the l26 uim. So stay tuned for lots of pics
Subbed, hope it turns out good.
Sent from my Galaxy Tab 3 8.0
Just stoped for the night. Need some more sand paper and such but stores closed haha.
Looks great so far. Back on the engine tomorrow and gonna be fun
you have a loooooooong way to go
Nawww
personally, i think polishing anything under the hood looks out of place. but you do as you wish
Not if I have polished valve covers and engine mounts?
Bling that mofo out!
Hahaah
what are you using on it right now? just sandpaper to start? or a dremel with some flapper wheels?
Drill with scotch pads for getting the nasty **** off. Than 320 sand paper. Than 600, than 1500 wet and 2000 and than aluminum pilish
Polish
a dremel with some flapper wheels would would work good in the "curves"
chances are that UIM ius full of EGR gunk. so be sure to clean as much of that out as possible too. if you plan on blocking the egr off as well if your states allows it that is.
Ehh ya.
« Previous Thread | Next Thread » |