Thread: Slight hesitation while revving

Results 1 to 6 of 6
  1. #1 Slight hesitation while revving 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    My wifes car 01 bonneville 119K miles has a slight hesitation when i rev it up under the hood. I did a scan with torque and while driving i was getting 8* of KR and my ft's were around 11 or so. Fuel pressure seems good at idle but i can't check it while driving. Iridium spark plugs in it that i'll be changing soon and i'll change the fuel filter too just to be safe. It's really doggy too. I'm not sure if i'm just used to driving my gtp or what but it's dog piss slow. No codes are thrown at all either. Any help would be appreciated.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  2. #2 Re: Slight hesitation while revving 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,030
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    figure out why the fuel trims are at 11. If thats long term, you got a vacuum leak.

    Clean the TB?

    SMGPFC Member #1
    Reply With Quote  
     

  3. #3 Re: Slight hesitation while revving 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    This weekend I'm gonna clean the tb, change fuel filter, and change plugs. I couldn't find a vacuum leak anywhere but there still could be one.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  4. #4 Re: Slight hesitation while revving 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,833
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    A Bonneville what?

    SE or SLE - Yeah..understandable it's slow and doggy
    SSEi - Get on that son! , extend your fpr hose and go for a drive. I did.

    Check that front trans mount, it's marshmellow has probably squished and puked. The programming in a Bonne should be a touch smoother than a GTP, but overall it's the same thing with different body panels and an extra couple hundred pounds.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  5. #5 Re: Slight hesitation while revving 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    It's an se bill. NA ftl

    I thought the front mount moved quite a bit.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  6. #6 Re: Slight hesitation while revving 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    The front mount looks fine but I can't really tell because of the metal around it. How do I tell if it's bad?

    I pulled the tb today and it was really clean inside so I threw it back on and checked the uim bolts and some were kinda loose so i tightened them up and it wasn't hesitating while revving anymore then I got to looking and 2 vacuum lines were split so I wrapped them in electrical tape and it seemed a lot better. I took it for a drive and it pulls harder now but the ltft's are in the 10's ish at wot and the stft is at 0. Also i'm still getting up to 6* of KR at WOT. Gonna seafoam it later and see if it makes a difference.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

Similar Threads

  1. 98 GTP service engine light and slight hesitation?
    By Cobraeater in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 91
    Last Post: 03-12-2012, 07:45 AM
  2. Car stalling and revving up
    By gpse2000 in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 4
    Last Post: 11-24-2011, 03:48 AM
  3. Revving when RPM's below 2000
    By Badley in forum General Tech Discussion
    Replies: 4
    Last Post: 03-31-2011, 08:44 AM
  4. Rapping/Rattle at Idle, goes away when revving
    By hoont79 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 9
    Last Post: 08-07-2010, 05:25 AM
  5. Engine Revving after filter change
    By mikeh in forum General Tech Discussion
    Replies: 4
    Last Post: 01-18-2010, 12:29 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •