I have a 96 v6 camaro series 2 i just changed plugs wire pcv valve fuel filter and hvac check valve and now the thing is missing...Could the pcv valve plate leak and cause this? Any other ideas are MORE than welcome!!
|
|
05-24-2011
I have a 96 v6 camaro series 2 i just changed plugs wire pcv valve fuel filter and hvac check valve and now the thing is missing...Could the pcv valve plate leak and cause this? Any other ideas are MORE than welcome!!
05-24-2011
No, but a crossed plug wire will. Either that or one is loose. Double check the firing order and your wires.
I wouldn't think a vac leak from the PCV plate would cause a miss. It would run wierd but not miss I would think.
05-24-2011
Checked all of the wires all in order correctly...unhooked the battery also to reset pcm nothing.
05-24-2011
check to see if one of the new plugs is cracked or broken.
Can you figure out which plug has the misfire??
If you can swap the coils around and see if the miss follows the coil. If it does, that coil is bad.
05-24-2011
vac leaks?
05-24-2011
Checked all once again but found a vac line from something on the fuel rail? where shld this go?
05-24-2011
That looks kinda like a fuel pressure regulator to me...
Originally Posted by W-Body Store
05-24-2011
the fuel presure regulator is on the other side this also has a line going to the throttle body
05-24-2011
Oddly enough, I think that might actually just be a vent.
Edit: Oh hey, EVAP Canister Switch.
Last edited by SlowNA06; 05-24-2011 at 09:51 PM.
05-24-2011
Im gonna try swapping a coil pack out and see if that fixes anything...
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
