Thread: Hard starting when warm after engine rebuild

Results 1 to 5 of 5
  1. #1 Hard starting when warm after engine rebuild 
    SE Level Member
    Join Date
    Jan 2021
    Location
    Georgia
    Posts
    2
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Just rebuilt the engine in my 02 gp gt. Have 300 miles on it plus about 5 hours idle time. First start of the day or when motors cold it starts fine. After i shut it off then try to restart itll crank for a few seconds start then immediately stall. I have to give it gas for a few seconds to keep it running but when its running it runs fine.. No pending engine codes. New plugs, wires. Fuel pressure is 55psi koeo, about 52psi running then jumps up to about 61 when vac line unplugged. Psi is about 58 when cranking.
    Any one have any ideas
    Reply With Quote  
     

  2. #2 Re: Hard starting when warm after engine rebuild 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    if your na it could be a bad fpr. pull and sniff the vac line for gas, if you pull the vac line running sometimes you get to see the fpr spitting gas out it.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: Hard starting when warm after engine rebuild 
    SE Level Member
    Join Date
    Jan 2021
    Location
    Georgia
    Posts
    2
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Scottydoggs View Post
    if your na it could be a bad fpr. pull and sniff the vac line for gas, if you pull the vac line running sometimes you get to see the fpr spitting gas out it.
    Vac line is dry no sign of fuel leaking out of fpr... Psi goes up about 9psi when unplugged so i think its good. Someone told me either bad head or intake gasket. Leaning more towards intake plenum gasket as it was a ebay special
    Reply With Quote  
     

  4. #4 Re: Hard starting when warm after engine rebuild 
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,714
    Thanks (Received)
    4
    Likes (Received)
    11
    Dislikes (Received)
    0
    pull the fluff from a q tip and use rubbig alcohol to gently scrub/wipe the thermisters clean.
    clean the throttle blade of the black carbon coking, you may also want to pull the IAC and clean it off as the passage can get a carbon ridge pushed up and cause it to lose fine control of the airflow.

    if your upstream (B1S1) O2 is a bosch unit or has close to 50k miles youll want to replace it with denso/NGK/AC delco. stay away from bosch, for some reason our pcm's do not like em.

    id start there if you have good manifold vacuum

    even if the so2 has only 30k on it it could be poisoned from coolant/oil from before the ovehaul
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP
    Reply With Quote  
     

  5. #5 Re: Hard starting when warm after engine rebuild 
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,714
    Thanks (Received)
    4
    Likes (Received)
    11
    Dislikes (Received)
    0
    and by thermisters i mean the tiny sensing fillaments inside the MAF sensor

    i hate how i neverr see an edit button on my posts....
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP
    Reply With Quote  
     

Similar Threads

  1. Hard Start When Warm
    By gingerdude in forum 3.1L V6 (LHO/LG8)
    Replies: 44
    Last Post: 07-03-2017, 11:44 PM
  2. Difficulty warm starting?
    By frozenlead in forum General Tech Discussion
    Replies: 2
    Last Post: 11-29-2012, 03:02 PM
  3. misfires/boggs during hard acceleration when engine is warm
    By baker01gt in forum General Tech Discussion
    Replies: 1
    Last Post: 09-23-2011, 06:43 AM
  4. Starting to rebuild my System again
    By Hayden in forum Audio, Security & Visual Electronics
    Replies: 58
    Last Post: 02-06-2009, 05:40 PM
  5. Has a really hard time starting when engine is hot
    By spenc938 in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 5
    Last Post: 11-05-2008, 11:27 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •