Thread: Engine Stall with MAF plugged in, unplugged revs high

Results 1 to 4 of 4
  1. #1 Engine Stall with MAF plugged in, unplugged revs high 
    GT Level Member
    Join Date
    May 2012
    Location
    Bloomington, IN
    Posts
    171
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I just changed out the power steering pump and did the water pump with everything off. I also did the LIM as I had a small leak out of the sides. I put everything back together and now it will crank and start for a second but then die right away. I had the ignition control module checked which was fine, I have 55 psi at the fuel rail. I then unplugged the MAF and it started fine but then revved super high seemingly out of control. I figured it might be a bad MAF so I swapped it out and the same thing occurred. It would crank start and then die. I unplugged the new MAF and then it revved super high.

    I'm at a loss. Is it my throttle body or TPS, perhaps a bad PCM. Please let me know I'm completely stuck.
    Reply With Quote  
     

  2. #2 Re: Engine Stall with MAF plugged in, unplugged revs high 
    GT Level Member
    Join Date
    May 2012
    Location
    Bloomington, IN
    Posts
    171
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Also, I have no CEL codes whatsoever.
    Reply With Quote  
     

  3. #3 Re: Engine Stall with MAF plugged in, unplugged revs high 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    check to see if the maf fuse blew, its marked ign. you can also make sure the maf's pig tail wires are in good shape.

    also make sure all your vac lines are back on and not broken. they get crappy and dont like to be messed with later in life.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  4. #4 Re: Engine Stall with MAF plugged in, unplugged revs high 
    GT Level Member
    Join Date
    May 2012
    Location
    Bloomington, IN
    Posts
    171
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Facepalm... the brake booster line was not fully engaged... runs like a dream now
    Reply With Quote  
     

Similar Threads

  1. Issue after intercooler install, car revs high then drops way low
    By Beatdowncity in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 97
    Last Post: 04-26-2015, 06:05 PM
  2. Found something unplugged in engine bay? No idea what it goes to?
    By Runicdionysus in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 3
    Last Post: 08-25-2014, 07:16 PM
  3. 1999 Grand Prix GT Trans revs high
    By pilgrim in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 1
    Last Post: 03-03-2012, 12:42 AM
  4. high revs as i start car
    By Jrs1987 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 23
    Last Post: 11-05-2011, 06:28 PM
  5. High Revs, Late Shifting, and low HP
    By Wigsos in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 1
    Last Post: 07-30-2010, 09:24 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •