4t65e bolt identification?

[paedbo]

Hi, I have a 2001 GT that had no over drive.

I pulled the side cover and 4th hub and sure enough its splines were stripped.

I had a problem getting out one bolt and need to replace it. Can someone help tell me what part number the bolt is?

I'll post a link to a page scroll down to the second set of pictures and its one of the bolts shown as "435"

http://www.gmtruckhq.com/drivetrain/...tion-3809.html


thanks.

[GMR Badass]

You can got to any local hardware store and pick up 10mm HEAD BOLT, M8x1.25x50.0

If you're unable to locate one give Dave a call at Triple Edge Performance and he will ship one out to you.

[BillBoost37]

Or you could also give Bill a holler. Thats a shallow headed 10mm driven bolt that is torqued to 18ft lbs.

[paedbo]

ok thanks I see rock auto has some listed under the valve body section but it just gives part numbers. If I could figure out which one it is I could just order it with the rest of the stuff.

[paedbo]

I found this over at Bonneville pro website. "Found replacement M8-1.25 50mm grade 10.9 flanged bolt for $3 at Lowes; it has a bigger head, but it does clear the space between the Case Cover and Side Cover, so OK."

I am going to go that route. If worse comes to worse i'll have the machinists at work modify it for low profile.


Thanks for your help.

[BillBoost37]

Where is CT are you? Cause...I'm in Enfield and have a pile of them. If you stopped over.. you could pick it up

[paedbo]

oh im in Milford. A good ways from you. Thank you for the offer. Funny the cars original owner lived around your area.

[BillBoost37]

That is kinda interesting.