Thread: 08 GXP trans line leak

Does anyone know how you stop this from leaking? The clip is in tight, and the line is pushed all the way in. I'm confused. Thanks

Sent from my Samsung Galaxy Note II

Get a new o-ring.

The o-ring is the black thing on the outside right?

Sent from my Samsung Galaxy Note II

Yup I actually have a spare one of those I'll give ya cause mines after market now

ignore the writing I did on the pic but those are the two I have. Or I could measure the size of the o-ring for u

Originally Posted by mrlogic1234

Does anyone know how you stop this from leaking? The clip is in tight, and the line is pushed all the way in. I'm confused. Thanks

Sent from my Samsung Galaxy Note II

Why not just take it back to the trans shop who did the work?

Originally Posted by 91parkave

Why not just take it back to the trans shop who did the work?

Because I'm the trans shop lol. It started leaking when I installed my aux trans cooler originally. I took the line out, cleaned everything and put it back in and all was good. So I recently relocated my trans cooler and now here we go again. So I you guys are saying that I need to replace the part that the line goes into?

Sent from my Samsung Galaxy Note II

Originally Posted by DirtDog

ignore the writing I did on the pic but those are the two I have. Or I could measure the size of the o-ring for u

Thanks I appreciate it. I'll pay for shipping of course. What do those things cost anyhow? I may just grab one locally if it's less expensive.

Sent from my Samsung Galaxy Note II

I'm not sure...u really only need the rubber o-ring

Ok, I'll look into finding one here first. Thanks for the offer and your help.

Sent from my Samsung Galaxy Note II

Yup. Local auto parts store should have one. They'll have this fittings for sure...I just ask

i had to replace the oring on the inside of the fitting, well almost a year later i have a little drip

Haha I guess mines been lucky but they were screwed in so tight it took a breaker bar to get them off

screwed in type, they slide and and are held on with a clip

Yea the rubber ring is is on the part that the line slides into.

its the inside lol