Who has pics of broken 4T65E parts? Post'm up! This should be stickied!!!
|
|
03-13-2008
Who has pics of broken 4T65E parts? Post'm up! This should be stickied!!!
03-13-2008
Lets start this out with some REAL carnage... my torque snapped this right in half apparently.
(edit: this was meant as a joke... haha)
Last edited by Tengis; 03-13-2008 at 12:19 PM.
03-13-2008
Pan:
Filter:
Speed Sensor:
Sun Gear:
Differential:
03-13-2008
Do I win? Wasnt the grand prize a fully build Trannyman transmission guaranteed to dip me into the 10's delivered to my door?
03-13-2008
HAHAHAHA Now your just talkin CrAZy!!!
03-13-2008
Come on, you gotta post some up. I KNOW you've seen worse. You have right?
03-13-2008
03-13-2008
You know, I would have actually preferred your damage over mine...LOL.
03-13-2008
Dave took some pic's and he'll post them up later, he's in the middle of building a tranny.
03-13-2008
It's true, that cat really makes things seem 10X better!Originally Posted by SyntheticShield
03-13-2008
irony?
03-13-2008
03-13-2008
No he's not, he's out there sluffin off, drinking a beer and his daughter is doing all the work?
03-13-2008
Naaaa, I waited until after I was working to slam a beer lol. Here are some pics of the few parts I saved for the heck of it. Sure there has been tons of metal shrapnel here and there but I never took pics of it. The first pic is probably my favorite, yet short and sweet!
Another shot below. Would anyone like to take a guess what caused the center of the sprocket to break out??? This was a bone stock 98 GTP that one week prior to the damage had a transmission flush at the BIG local trans shop. It was 3 quarts low on fluid and she went to pass somebody and the rpms went way up and then BANG!!! They flushed the trans and never checked the fluid level, admittingly
This pic I have posted before and why I dont suggest an LSD to anyone for daily street driving!
Below is a common problem, No 4th gear anymore. The splines stripped off the end of the 4th clutch shaft
And the trans I just went through a few days ago for a customer. No movement at all in any gear and gradually went from slipping to nothing. Below are a handful of pics of the parts. A BAD sprocket support bearing will do THIS!!!
Pic of what it is supposed to look like
03-13-2008
Awww man, you were supposed to make me feel better and show me hordes of metal in a pan and how you replaced a $5 part and made it like new again.
03-13-2008
that's called a $5 dollar bus pass
lol
03-14-2008
I dont like you anymore.
03-14-2008
So is Grey Hound good for you?? lol
03-14-2008
The one with the cat looking through the hole in the diff cover cracked me up. LOL
Mine:
Worn but not yet shredded 4th gear clutch shaft:
(replaced and upgraded to the newer hardened one)
Broken pins from the Input Speed Sensor reluctor wheel:
Worn cover from the pins being loose:
Ripped tranny mount form too much damn torque:
Not really carnage, but repairing the damage from over torqued tranny pan bolts with my 12 ton arbor press:
~F~
03-17-2008
I had one of those too! Both of my trans issues happened within two weeks of eachother:The one with the cat looking through the hole in the diff cover cracked me up. LOL
Mine:
Worn but not yet shredded 4th gear clutch shaft:
(replaced and upgraded to the newer hardened one)
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
