Thread: Getting a shift kit

Im getting a shift kit from zzp, any experience or input on it ?

Moved your post to the tranny section.

make sure you torque the accumulator down and get messy

The hardlines should slip back into the accumliator easily. If you have to fight them, take it off and try to install again.

In stock form these transmissions are fairly sloppy and things start breaking around the 300whp mark, but GM racing uses them in their 1200 HP sunfire race car and there are several of them running 9 and 10 second quarter mile runs by the big vendors out there. After a few parts are upgraded in these transmissions they will take a lot of power no problem. You are definately on the nose about the term Shift Kit, that is a registered name from Transgo and everyone copies the name, have for years and years but that is just how it is and for people not in the trans industry they dont know any better so anything that changes shift behavior is called a shift kit. I dont even bother pushing this because I would be kicking a dead horse and stirring a lot of pots lol. Shift Kit is just easy for everyone to relate to I guess and they know what its intended purpose is. While Transgo does have a kit for this trans its not one of their better kits compared to other products though it does help out and makes a great base for package of upgrades that nobody else offers, especially the accumulator spring setup.

I do internal work in addition to the Transgo kits to make the shift firmness/quickness match the cars power levels but unless you are rebuilding the trans and the whole thing is apart it doesnt help people looking for the quick easy upgrade. For selectable shift firmness and hard shifts, if you really want that, then the best shift kits out there are from Intense and if you can find an original Thrasher/Transgo kit. They include new accumulator springs and selectable spacers with firmness levels in the instructions. And of course the cheapest route is to go with the W-body store or ZZP kit which is nothing more than spacers that anyone can buy at a hardware store and they do not include any new firmer springs, but simply act as spacers to limit accumulator piston travel but wont give the full benifit of the better kits. Pcm tuning is another way to get harder shifts, you can make a stock trans bark the tires just by doing some tuning though I never recommend this as you really have to turn up the pressure to accomplish this.