|
|
11-08-2016
Does any one on the forum know if the 80 is bigger than the 75
Will it be the same mounting situation as the 75
Or would I be able to swap the internals
The impala sub frame would bolt up so I would just have to fab motor mounts or vise versa right
The trans axle for the 2012 impala would bolt up to my 06 gp
So would the 2007+ gxp pcm work
it should work with the trans ??
6t70 would hold power nicely and its 2016 and I can't find a 3800/6 auto swap anywhere all the parts are in wbodys already
11-08-2016
Once you figure out how the heck you want to control the transmission, let us know.
The GXP still only uses a 4T65e HD 4 speed auto, there is no way that computer could ever run the 3800 nor could it even control a 6 speed transmission. Same with with a 3800 computer, they could never control a 6 speed auto.
That transmission is light years ahead in technology and requires a much faster and complex controller to power it. The only way I see this working is if somehow you buy a seperate stand alone transmission controller that you can program to run that 6 speed auto.
11-09-2016
I was already thinking of that Powertrain Control Solutions - TCM-2650 Mechatronic Transmission Controller??
11-09-2016
Keep in mind that you will lose a lot of self-diagnostic capability.
And you may still have driveability issues with the TCM and PCM not really communicating with load values which is a primary part of drivability
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
