Thread: Oil filter adaptors

Results 1 to 4 of 4
  1. #1 Oil filter adaptors 
    GXP Level Member Timing's Avatar
    Join Date
    Feb 2012
    Location
    gardner,mass
    Posts
    2,142
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Has anyone used these oil filter adaptors for a 284 swap? I know about the 88 rheatta one but what about these?
    http://www.gmtuners.com/swap/3800.htm
    3800-compatible Oil Filter Adapters
    Below are some examples of the different oil filter adapters GM makes that will work with the 3800 Series I and II, as well as the 3300 and 3.0L V6 90 degree engines.

    This adapter can be found on 85-87 N-body (Grand Am) cars on the 3.0L 90 degree V6 engine. This adapter will clear the 4T60/440T4 auto transmission (not tested on the 4T60-E or 65-E), and puts the oil filter right next to the oil drain plug. Because of ground clearance, only the PF47 (short) style oil filter can be used.


    This adapter can be found on 3800 (series I and II) equipped w-body cars. This style routes the filter above the right CV axle.


    This adapter can be found on some Full-size GM cars equipped with the 3800 engine. This design routes the filter right next to the crank balancer above the cradle frame rail. Because of space constraints, you may only be able to use the PF47 (short) style filter.


    This adapter is most commonly found on H-body GM FWD cars like the 96 Olds Eighty-Eight. This design kicks the filter back towards the oil pan behind the balancer. This will work in the Fiero, however, if the use of the long style filter (PF52) is desired, you may need to cut away the left side cradle mount. If your exhaust is routed like the stock Fiero, you may also have issues in trying to use this adapter.



    This oil filter adapter is from an F-body L36 3800. GM p/n: 12569217. Retail price is about $34. This adapter will offer plenty of clearance for most any Fiero swap although you may not be able to use the long PF52 oil filter due to clearance issues with the chassis frame rail.
    08 MazdaSpeed 3- Treadstone tr8l, Ebay Piping, Ported intake,Thermal gasket, Cs Injector Seals,Cobb intake/inlet, Autotech Internals, Poly mounts, Speed Daddy DP, Magnaflow CB,
    RPF1 17x9 255/45 Direzza Zll
    04 COMPG- Vs, getrag 284 RIP
    Reply With Quote  
     

  2. #2 Re: Oil filter adaptors 
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,714
    Thanks (Received)
    4
    Likes (Received)
    11
    Dislikes (Received)
    0
    if none of those are viable for your swap....making a remote filter adaptor is quite easy
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP
    Reply With Quote  
     

  3. #3 Re: Oil filter adaptors 
    GrandPrix Junkie
    Join Date
    Mar 2012
    Location
    NC
    Posts
    3,264
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I'm surprised you made a thread about this as I've already told you which filter housing to use...88-90 Regal or Reatta with the original 3800 (pre-series) engine. In fact, I even told you how it needs to be modified...
    Reply With Quote  
     

  4. #4 Re: Oil filter adaptors 
    GXP Level Member Timing's Avatar
    Join Date
    Feb 2012
    Location
    gardner,mass
    Posts
    2,142
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Sven The Sexman View Post
    I'm surprised you made a thread about this as I've already told you which filter housing to use...88-90 Regal or Reatta with the original 3800 (pre-series) engine. In fact, I even told you how it needs to be modified...
    Yea i know jason and thankyou but i came across this thread looking for pictures of that adaptor and seen these and some looked promising, so i wasnt sure if they were unknown of.
    08 MazdaSpeed 3- Treadstone tr8l, Ebay Piping, Ported intake,Thermal gasket, Cs Injector Seals,Cobb intake/inlet, Autotech Internals, Poly mounts, Speed Daddy DP, Magnaflow CB,
    RPF1 17x9 255/45 Direzza Zll
    04 COMPG- Vs, getrag 284 RIP
    Reply With Quote  
     

Similar Threads

  1. Racetronic Injector adaptors
    By Frosty in forum General Tech Discussion
    Replies: 0
    Last Post: 02-04-2013, 01:13 PM
  2. Changed Tranny Fluid/Filter, Fuel Filter Tonight
    By nickbuol in forum General Tech Discussion
    Replies: 5
    Last Post: 10-15-2010, 06:04 PM
  3. New deck, old deck, or adaptors, HU relocation?
    By yourTVlies in forum Audio, Security & Visual Electronics
    Replies: 13
    Last Post: 07-21-2008, 01:20 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •