Thread: Going to the track soon, what tire/wheel combo?

Results 1 to 15 of 15
  1. #1 Going to the track soon, what tire/wheel combo? 
    Donating Users Kejross's Avatar
    Join Date
    Feb 2010
    Location
    Oklahoma City, OK
    Posts
    811
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Well I'm finally getting my car tuned and should have it all done next week after my battery and new power inverter arrive for the laptop. So I been thinking about what tire/wheel combo to run... I have 4 options right now which are

    1. 18's with 235-50-18 tires that are taller than stock
    2. 18's with 245-45-18 tires that are about the same size as stock
    3. stock abs wheels with 225-60-16 tires all seasons
    4. 17's from a newer pontiac torrent but had them on my wifes grand am before it was totalled a couple months ago so the tires are only 235-45-17


    Number 4 is the option I'm leaning towards mainly because the tires are the wrong size for anything I have so I wouldn't mind burning them off the rims and are a decent bit smaller than stock, which correct me if I'm wrong will act as if I had a taller gear ratio due to them being smaller than stock. My main questions are, will they be too small and not let me even try to hook up? Are the sidewalls too short? I weighed the 17 and the stocker and got 46.8lbs on the 17 with tire and 41 for the stocker. Is that 6ish pounds per wheel really gonna hurt me that bad?(I will have stockers aired to the max out back with any combo) I don't think I will use my stockers just because they have great tires that I need for winter but I wouldn't mind picking up a copuple spare rims or even some steelies if I could find them in 16 if that's the far better option. If I do that should I get a smaller than stock tire for that better gear ratio then? And yes the 18's were a joke, I know better than to run those big monsters.
    Last edited by Kejross; 08-19-2011 at 12:00 PM.
    SOLD-98 4dr GTP, l32 Swapped, IS2 heads, IS3 cam, S2 intercooler, S3 FMHE, E85, 65# inj, N* TB w/LQ4, OBX Headers, Borla catback, 3.0 zzp mps, lc-1 wideband, HP Tuners, PRJ wires, FWI, Lowered. 04 GTO M6, 07 Grand Prix LS4 powered GXP. 98 V6 GMC SWB, exhaust, custom intake. 09 HHR (Wifes)
    Reply With Quote  
     

  2. #2 Re: Going to the track soon, what tire/wheel combo? 
    Donating Users Kejross's Avatar
    Join Date
    Feb 2010
    Location
    Oklahoma City, OK
    Posts
    811
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    And I do not have a built trans, I have a $102.50 pullapart special that's been rebuilt at least once... And with that being said I really don't care if it blows up cause I can go grab another for the same price. No I don't wanna run slicks and blow it on the first pass but I wouldn't mind chancing it here and there is what I am saying.
    SOLD-98 4dr GTP, l32 Swapped, IS2 heads, IS3 cam, S2 intercooler, S3 FMHE, E85, 65# inj, N* TB w/LQ4, OBX Headers, Borla catback, 3.0 zzp mps, lc-1 wideband, HP Tuners, PRJ wires, FWI, Lowered. 04 GTO M6, 07 Grand Prix LS4 powered GXP. 98 V6 GMC SWB, exhaust, custom intake. 09 HHR (Wifes)
    Reply With Quote  
     

  3. #3 Re: Going to the track soon, what tire/wheel combo? 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    Choice #3 would be the best one.

    Why you may ask.

    1) Well for one, factory tire size...speedo would be correct.
    2) That is the lightest wheel out of all 4, most likely...thus least amount of rotating mass...and more important, less wear on the transmission
    3) Bigger the wheel...and the tire...harder the transmission has to work to turn all that...plus the more rotating mass...the slower you go...which is why people run small, light wheels at the strip.

    That's my thoughts on it.
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  4. #4 Re: Going to the track soon, what tire/wheel combo? 
    Donating Users Kejross's Avatar
    Join Date
    Feb 2010
    Location
    Oklahoma City, OK
    Posts
    811
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by bluegtp91 View Post
    Choice #3 would be the best one.

    Why you may ask.

    1) Well for one, factory tire size...speedo would be correct.
    2) That is the lightest wheel out of all 4, most likely...thus least amount of rotating mass...and more important, less wear on the transmission
    3) Bigger the wheel...and the tire...harder the transmission has to work to turn all that...plus the more rotating mass...the slower you go...which is why people run small, light wheels at the strip.

    That's my thoughts on it.
    1. I have hpt and can adjust the speedo to read whatever I wish, but that's not a factor cause I'll only be running them at the strip. And I almost plan on breaking something so I'll more than likely be trailering it down too...
    2. Is the 12 extra pounds on the drive wheels really gonna do that much? any ideas on time drop? maybe a tenth? or worse?
    3. That's probably more of a toss up ain't it since I have smaller and heavier and bigger and lighter?

    16's
    Sidewall: 5.3
    Diameter: 26.6
    Circumference: 83.7
    Revs/mile: 757

    17's
    Sidewall: 4.2
    Diameter: 25.3
    Circumference: 79.6
    Revs/mile: 796


    Any idea's on a 16 steelie weight with average tire? I have big brakes so I gotta at least have a 16.
    SOLD-98 4dr GTP, l32 Swapped, IS2 heads, IS3 cam, S2 intercooler, S3 FMHE, E85, 65# inj, N* TB w/LQ4, OBX Headers, Borla catback, 3.0 zzp mps, lc-1 wideband, HP Tuners, PRJ wires, FWI, Lowered. 04 GTO M6, 07 Grand Prix LS4 powered GXP. 98 V6 GMC SWB, exhaust, custom intake. 09 HHR (Wifes)
    Reply With Quote  
     

  5. #5 Re: Going to the track soon, what tire/wheel combo? 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    16" stockers...

    http://www.youtube.com/watch?v=XttOe4rerLo

    These ones:

    http://www.grandprixforums.net/stock...ale-50662.html

    Forget where i found this one:

    A: torque star = 14-15lbs
    A: crosslace = 15lbs? (not 100% sure)
    A: flat 5 star = 17lbs-18lbs? (not 100% sure)
    A: snow flake (3 star) = 21-22lbs
    Reply With Quote  
     

  6. #6 Re: Going to the track soon, what tire/wheel combo? 
    GTX Level Member Ridin ON Chrome's Avatar
    Join Date
    Dec 2007
    Location
    Houston/Baton Rouge
    Posts
    1,095
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    I would run the 17s on front and 16s on the rear. You want the narrowest tires you can get on the rear..

    But with crappy street tires, all 4 choices aren’t going to do much for traction.
    98 GTP-Mods? Yeah, lots of them
    2009 HEMI RAM- Mods are in the works!!

    01 Regal GS-SOLD :-(
    Reply With Quote  
     

  7. #7 Re: Going to the track soon, what tire/wheel combo? 
    Donating Users Kejross's Avatar
    Join Date
    Feb 2010
    Location
    Oklahoma City, OK
    Posts
    811
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Ridin ON Chrome View Post
    I would run the 17s on front and 16s on the rear. You want the narrowest tires you can get on the rear..

    But with crappy street tires, all 4 choices aren’t going to do much for traction.
    That's still the setup I am leaning towards... I figure the 16's have the weight advantage but I don't see 12lbs killing me that much and plus the 17's are a smidge wider, and with them being shorter I will get a better gear ratio in effect. Plus I really don't wanna smoke my winter tires...lol You don't think they will grab that well even if I heat the crap out of them with a big smokey burnout? All 4 of them have like new tread and I don't mind burning some of it off since these will only see track use. Should I go super low on the tire pressure? like 15psi maybe?
    Last edited by Kejross; 08-21-2011 at 02:10 PM.
    SOLD-98 4dr GTP, l32 Swapped, IS2 heads, IS3 cam, S2 intercooler, S3 FMHE, E85, 65# inj, N* TB w/LQ4, OBX Headers, Borla catback, 3.0 zzp mps, lc-1 wideband, HP Tuners, PRJ wires, FWI, Lowered. 04 GTO M6, 07 Grand Prix LS4 powered GXP. 98 V6 GMC SWB, exhaust, custom intake. 09 HHR (Wifes)
    Reply With Quote  
     

  8. #8 Re: Going to the track soon, what tire/wheel combo? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    warming them up with a burnout will most likely result in more wheel spin. It's better to just run them without doing a burnout most of the time.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  9. #9 Re: Going to the track soon, what tire/wheel combo? 
    Donating Users Kejross's Avatar
    Join Date
    Feb 2010
    Location
    Oklahoma City, OK
    Posts
    811
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by dsmuts View Post
    warming them up with a burnout will most likely result in more wheel spin. It's better to just run them without doing a burnout most of the time.
    Just a quick little one maybe to clean them off?
    SOLD-98 4dr GTP, l32 Swapped, IS2 heads, IS3 cam, S2 intercooler, S3 FMHE, E85, 65# inj, N* TB w/LQ4, OBX Headers, Borla catback, 3.0 zzp mps, lc-1 wideband, HP Tuners, PRJ wires, FWI, Lowered. 04 GTO M6, 07 Grand Prix LS4 powered GXP. 98 V6 GMC SWB, exhaust, custom intake. 09 HHR (Wifes)
    Reply With Quote  
     

  10. #10 Re: Going to the track soon, what tire/wheel combo? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    maybe just a little bit but i've had better luck not doing any burnout at all.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  11. #11 Re: Going to the track soon, what tire/wheel combo? 
    Donating Users Kejross's Avatar
    Join Date
    Feb 2010
    Location
    Oklahoma City, OK
    Posts
    811
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by dsmuts View Post
    maybe just a little bit but i've had better luck not doing any burnout at all.
    What kinda PSI you run in the fronts?
    SOLD-98 4dr GTP, l32 Swapped, IS2 heads, IS3 cam, S2 intercooler, S3 FMHE, E85, 65# inj, N* TB w/LQ4, OBX Headers, Borla catback, 3.0 zzp mps, lc-1 wideband, HP Tuners, PRJ wires, FWI, Lowered. 04 GTO M6, 07 Grand Prix LS4 powered GXP. 98 V6 GMC SWB, exhaust, custom intake. 09 HHR (Wifes)
    Reply With Quote  
     

  12. #12 Re: Going to the track soon, what tire/wheel combo? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    my experience was with a rwd though. Guess i should have said that lol
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  13. #13 Re: Going to the track soon, what tire/wheel combo? 
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    To be frank....

    My car on the street, with cold tires, does not hook very well.

    Abuse the tires for 40 minutes and its damned surprising what sort hook can be achieved.
    Reply With Quote  
     

  14. #14 Re: Going to the track soon, what tire/wheel combo? 
    Donating Users Kejross's Avatar
    Join Date
    Feb 2010
    Location
    Oklahoma City, OK
    Posts
    811
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by matt5112 View Post
    To be frank....

    My car on the street, with cold tires, does not hook very well.

    Abuse the tires for 40 minutes and its damned surprising what sort hook can be achieved.
    I know, my oversized tire running 18's lay down patches of rubber everywhere I go. My transmission hates me, I know this...
    SOLD-98 4dr GTP, l32 Swapped, IS2 heads, IS3 cam, S2 intercooler, S3 FMHE, E85, 65# inj, N* TB w/LQ4, OBX Headers, Borla catback, 3.0 zzp mps, lc-1 wideband, HP Tuners, PRJ wires, FWI, Lowered. 04 GTO M6, 07 Grand Prix LS4 powered GXP. 98 V6 GMC SWB, exhaust, custom intake. 09 HHR (Wifes)
    Reply With Quote  
     

  15. #15 Re: Going to the track soon, what tire/wheel combo? 
    GTP Level Member OrangeL67's Avatar
    Join Date
    Nov 2009
    Location
    Michigan
    Posts
    634
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by dsmuts View Post
    maybe just a little bit but i've had better luck not doing any burnout at all.
    I've pulled 1.9 60 footers on bald all seasons with flat 5 wheels. I aired down to about 22-25 psi and did a big huge burnout. Doing this with all seasons has netted me better 60 footers than with DR's.

    However, I think because the tires were nearly bald, it actually helped my traction after they were heated up really well. My guess is that the flatter surface mated to the prepped track similar to a slick (just with not as soft as a compound)

    Call me crazy but bald all seasons are better than DR's in my opinion hands down for this platform. I know a couple guys who have had the same luck. Just be sure that you don't show wires. Wouldn't wanna hit the wall after a blowout.

    VS cam build 13.01@107 316whp/ XP build #1 12.78@110 334whp/ XP build #2 12.56@113 347whp
    IS3 Cam build (Ready to put out some serious numbers)
    Reply With Quote  
     

Similar Threads

  1. Staggered wheel and tire combo
    By jwindes in forum Tires & Wheels
    Replies: 18
    Last Post: 04-15-2011, 01:51 PM
  2. 235 series tire on a 16" wheel?
    By BLEWGTP in forum Tires & Wheels
    Replies: 12
    Last Post: 05-21-2010, 05:31 PM
  3. Wheel and Tire question
    By zerolimitsgt in forum Tires & Wheels
    Replies: 3
    Last Post: 03-17-2010, 03:50 PM
  4. Official wheel/tire thread
    By Boostd1 in forum Tires & Wheels
    Replies: 17
    Last Post: 01-02-2010, 03:17 PM
  5. Lakeshore Wheel & Tire?
    By Sheepdog in forum General Tech Discussion
    Replies: 4
    Last Post: 08-04-2009, 01:13 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •