Thread: I am the stupidest and unluckiest guy on this forum and I'm mad about it.

Results 1 to 12 of 12
  1. #1 I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    SE Level Member
    Join Date
    Mar 2017
    Location
    Pacific Wonderland
    Posts
    81
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    My sister is needing a new car for her 17 y/o daughter. she asks that if she gets a cheap one if I can wrench on it and make it driveable and safe. Of course I can and will.

    She comes across a 2005 Impala with 120k going for 1,000 due to a "head gasket"

    I say yes that's the car. Get it. The 3800 is the only motor I have any real experience with (thanks to this website).

    CEL says misfire, and I notice it likes to heat up, PERFECT I think, I'll do the LIM gasket and everything and this $3k car will be big, safe, reliable, and at half cost.

    4 days later, after messing with it in my free time after work, it has new LIM, UIM gaskets, freshly cleaned manifold and throttle body (they were nasty), new plug wires and of course new oil.
    The previous owner already put in new spark plugs but I could tell he really didn't know a thing about cars and the people who worked on it probably didn't either.

    I start it up and notice it's still misfiriing. Just gave it a compression test that didn't look good at all -> Shared album - Ian Oliver - Google Photos

    Now I'm realizing I may have the one 3800 in the whole state with a bad head gasket. I thought for sure that was impossible. I am a fool in a man's shoes. I should have double checked everything instead of assuming I knew it all.
    Reply With Quote  
     

  2. Thanks wowitsfast thanked for this post
  3. #2 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    now that sucks......

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  4. #3 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,690
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    Chats
    60223
    just swap the bottom end out
    Reply With Quote  
     

  5. #4 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    SE Level Member
    Join Date
    Mar 2017
    Location
    Pacific Wonderland
    Posts
    81
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    My options are to tear it down, or swap the whole thing with the motor I've been hanging onto that's in my wrecked '98 GT. Either way, it'll be new territory in my realm of mechanics. *breathe* I can do it.
    Reply With Quote  
     

  6. #5 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,833
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Chats
    98246
    Can you feel the pressure coming out if you pull the valve cover cap or does it show externally? If not.. you might have the piston in the oil pan mod. Typically you see low pressure from a cylinder with a leak. I have seen zero in the past.. and it was missing the piston. I later located it in the pan.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  7. #6 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    SE Level Member
    Join Date
    Mar 2017
    Location
    Pacific Wonderland
    Posts
    81
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    That's an interesting one! But no it does pump some pressure if you watch the video long enough. Pumps to 30 then 60 and that's about it.
    Reply With Quote  
     

  8. #7 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    could be a bend push rod. kinda rare for a na engine to bend one, unless it was being beaten to hell. take the vc off and spin them, if one is bent you'll know fast. might have to bump the engine over some to get them to spin easy. want the rocker down to have less pressure on the rod.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  9. #8 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    SE Level Member
    Join Date
    Mar 2017
    Location
    Pacific Wonderland
    Posts
    81
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Good idea, I'll pull the cover off next time I get a minute. I shoulda done that too anyway. There was a lot of carbon build up in the throttle so mayyybe it's just a bad seat.
    I hooked it up to my scanner and it doesn't seem to misfire at all in the upper rpm range. It drives just fine really, only really feels like it's missing at idle.
    Reply With Quote  
     

  10. #9 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    SE Level Member
    Join Date
    Mar 2017
    Location
    Pacific Wonderland
    Posts
    81
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Finally ripped the heads off. Found all the missing coolant. and just to make things sweeter, a crack in the head! (cylinder 3, see pic)

    So on my current run, the tranny will probably explode around the time it's road worthy again.



    Reply With Quote  
     

  11. #10 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    yup, thats a problem head right there.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  12. #11 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    Donating Users bandook's Avatar
    Join Date
    Apr 2015
    Location
    Columbus, OH
    Posts
    1,781
    Thanks (Received)
    2
    Likes (Received)
    27
    Dislikes (Received)
    0
    Chats
    246
    You going to have them repaired and get 'er going again?
    Top Swapped 01 Imp
    VS (very small?) cam, SD Headers, 2.8" pulley, 29°, ported everything, E85, AEM water/meth, Deka 60's, HPT tuned
    Reply With Quote  
     

  13. #12 Re: I am the stupidest and unluckiest guy on this forum and I'm mad about it. 
    SE Level Member
    Join Date
    Mar 2017
    Location
    Pacific Wonderland
    Posts
    81
    Thanks (Received)
    1
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    I'm gonna get a new head from the junkyard. Called them and they said $40 if I pull it, $80 if they have one on the shelf. Then I'll get it resurfaced. Cheaper than a repair from the machine shop
    Reply With Quote  
     

Similar Threads

  1. My first forum ever!
    By carcrobatics in forum Introductions/Noob Questions
    Replies: 17
    Last Post: 12-13-2012, 10:45 AM
  2. New to the forum
    By jtbowen in forum Introductions/Noob Questions
    Replies: 5
    Last Post: 12-12-2012, 04:27 PM
  3. New to the forum
    By Cars4999 in forum Introductions/Noob Questions
    Replies: 4
    Last Post: 12-05-2012, 09:46 AM
  4. new to forum
    By BULLEE in forum Introductions/Noob Questions
    Replies: 12
    Last Post: 01-12-2011, 05:01 PM
  5. New to Forum
    By desertws6 in forum Introductions/Noob Questions
    Replies: 17
    Last Post: 07-25-2010, 09:25 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •