Thread: Eddie's table modifier, my table too big?

When importing my bin, Eddie's table modifier complains that my VE table is larger than what the program is used to, or something. Can anyone explain why?

The error actually comes from trying to export the ve changes. It says "you have chosen to use the smaller VE table, but the binary file you imported contains the larger table. Should the calculations be used for the larger table?"

In short, I don't know what it's telling me.

I would suggest just reading the bin file and letting the program do the work of extracting the VE table. After you have loaded your scan data, under the file menu, select read bin file. Then find the bin file that was used to make the scan and the program will load it in. It will pull the MAF, VE, and timing tables automagically.

Try that and see if it works.

Here's what I do.

1.) Open program.
2.) load scan data
3.) Read bin
4.) Now, if I try to save the bin file it gives me the mentioned error.

I guess I could export the VE changes manually...