Thread: Dirt cheap mods: my never ending struggle

Page 8 of 8 FirstFirst ... 678
Results 141 to 159 of 159
  1. #141 Re: Dirt cheap mods: my never ending struggle 
    GrandPrix Junkie idrivejunk's Avatar
    Join Date
    Jan 2014
    Location
    AR
    Posts
    4,899
    Thanks (Received)
    4
    Likes (Received)
    32
    Dislikes (Received)
    1
    Chats
    0
    Congrats on rear wheel drive. I had a 500ish horse 83 for a time, and have seen several of them with merciless wheel hop like it had. I can probably help advise on metal work stuff, click the link in my signature for an eyeful. Unfortunately, metric Montes are not made of 18 gauge steel like they were before so rust goes through quicker. One reassuring thing I can say is that besides a welder theres nothing very expensive in the way of tools for rust repair. One thing you may find much web controversy over is the use of acid products against rust. Also much confusion about "direct to metal" primers. I can offer pointers about both if you are freaked out by the talk you see. Enjoy the correct wheel drive performance oriented bodywork project, lol.
    All Grand Prix, all the time. 69 Model J, 99 GT & GTP coupes. All junk, haha.
    Reply With Quote  
     

  2. #142 Re: Dirt cheap mods: my never ending struggle 
    SE Level Member
    Join Date
    Oct 2018
    Location
    Gig Harbor
    Posts
    1
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    I’m surprised to see this thread lasted so long. I’m new to the 3800 scene. Just picked up a 2000 regal GS. I know it’s not a GP GTP but this was the only forum still alive. And we share similar parts!


    Sent from my iPhone using Tapatalk
    Reply With Quote  
     

  3. #143 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Quote Originally Posted by idrivejunk View Post
    Congrats on rear wheel drive. I had a 500ish horse 83 for a time, and have seen several of them with merciless wheel hop like it had. I can probably help advise on metal work stuff, click the link in my signature for an eyeful. Unfortunately, metric Montes are not made of 18 gauge steel like they were before so rust goes through quicker. One reassuring thing I can say is that besides a welder theres nothing very expensive in the way of tools for rust repair. One thing you may find much web controversy over is the use of acid products against rust. Also much confusion about "direct to metal" primers. I can offer pointers about both if you are freaked out by the talk you see. Enjoy the correct wheel drive performance oriented bodywork project, lol.
    Quote Originally Posted by idrivejunk View Post
    Congrats on rear wheel drive. I had a 500ish horse 83 for a time, and have seen several of them with merciless wheel hop like it had. I can probably help advise on metal work stuff, click the link in my signature for an eyeful. Unfortunately, metric Montes are not made of 18 gauge steel like they were before so rust goes through quicker. One reassuring thing I can say is that besides a welder theres nothing very expensive in the way of tools for rust repair. One thing you may find much web controversy over is the use of acid products against rust. Also much confusion about "direct to metal" primers. I can offer pointers about both if you are freaked out by the talk you see. Enjoy the correct wheel drive performance oriented bodywork project, lol.
    Haha thanks! I'm definitely going to need some help on repairs. I'm struggling enough with skim coating the hood and sanding! I'll have to see what comes next though. I think this will be more on hold until both my fiero is out of the garage finally, and my grand prix is up and running. I convinced the wife to let me swap the cam and do the valvetrain like I want, so I'm a happy camper!

    Also got some neat side projects going on, such as a diy electrolysis tank and "hot tank" to degrease and de-rust parts for all my project cars! Hopefully it'll work and I won't have to spend a ton of money for a machine shop to do it for me! As much as I have to do though, I think it'll be useful. I'm getting really bad about posting updates, but I'll try to be better!
    Reply With Quote  
     

  4. #144 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    haha thanks! And welcome! I'm sure there's tons out there that's useful towards your project. I mainly specialize in electronics and transmissions and just janky general diy stuff, so I should have some entertaining stuff to post from time to time!

    Good thing about a regal is that it's less likely to be beat on like a gtp! Plus they're cheap to insure and still have a lot of pep to them. Mine isn't even truely a gtp (yet...). Started out as a na gt actually. Hopefully I'll get the funding ok from my wife so I can finally get this project done! But if you have any questions or need help, feel free to pm me! Good luck!
    Reply With Quote  
     

  5. #145 Re: Dirt cheap mods: my never ending struggle 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,833
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Chats
    98246
    I'm a month or so late to seeing your Monte, always liked that body style. IMO.. pull a Brandon move and pickup a higher mileage cheap 5.3 or 6.0 and swap that plus trans into the car. You'd have computer, fuel injection and I'm sure either would fit under that big ole G body hood easy enough.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  6. Likes BrandonHall10 liked this post
  7. #146 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Quote Originally Posted by BillBoost37 View Post
    I'm a month or so late to seeing your Monte, always liked that body style. IMO.. pull a Brandon move and pickup a higher mileage cheap 5.3 or 6.0 and swap that plus trans into the car. You'd have computer, fuel injection and I'm sure either would fit under that big ole G body hood easy enough.
    haha thanks Bill! I'm really going to have to buckle down and create a separate build thread for it. That's the long term plan, mainly because of fuel economy concerns. I'm still going back and forth between my Monte and my Fiero. Don't really have money for either!
    Reply With Quote  
     

  8. #147 Re: Dirt cheap mods: my never ending struggle 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,833
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Chats
    98246
    In that case I'd suggest pulling a Scotty and doing good for others and magically parts are delivered. That's how he got started. Was funny the first time I met him was doing a trans swap and he didn't have the excess cash to spend on fun parts. Wasn't too long after he helped a couple of guys and parts started flowing his way.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  9. #148 Re: Dirt cheap mods: my never ending struggle 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    well i scoped out a car, then picked up a member at the airport, and took him to pick up the car i looked at for him,

    no one wants to drive to a airport, especially a NYC airport lol we got lucky tho, he had a late morning flight in and traffic was low.

    a month later i was told a box was coming and i had to install what ever it was lol

    in the box came a used set of 1.95 YT rockers with push rods and all, 90 lb springs.. retainers and even put a hose in the box to run the compressor in the cylinders to hold the valves up in place.

    im still running those rockers like 6-7 years later.

    installed on the second engine in this pic lol

    Dirt cheap mods: my never ending struggle Attached Images

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  10. #149 Re: Dirt cheap mods: my never ending struggle 
    GrandPrix Junkie ItHurtz's Avatar
    Join Date
    Feb 2011
    Location
    Antioch, IL
    Posts
    3,521
    Thanks (Received)
    4
    Likes (Received)
    17
    Dislikes (Received)
    2
    Chats
    156024
    Your just a parts whore.
    2000 GTPT Sold-brandonhall10 built trans
    2009 Challenger SRT8
    http://www.grandprixforums.net/threa...uestion.....no
    Expert at being gay.
    Reply With Quote  
     

  11. #150 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Quote Originally Posted by BillBoost37 View Post
    In that case I'd suggest pulling a Scotty and doing good for others and magically parts are delivered. That's how he got started. Was funny the first time I met him was doing a trans swap and he didn't have the excess cash to spend on fun parts. Wasn't too long after he helped a couple of guys and parts started flowing his way.
    haha Thanks Bill! I definitely help out whenever I can, but unfortunately pretty much everyone here is already out of the gp game. But I'm always up for help (when my schedule permits).
    Reply With Quote  
     

  12. #151 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    On a side note, haven't posted anything about my third car on here, and until now, haven't really had to do much! Well, ended up with two burnt out led bulbs and after replacing them at the same rate as halogens and more often than I do bixeon bulbs, I decided to do a bone cheap retrofit! Here's the results (note, I didn't have time to polish the lenses, so it doesn't look great, but it's functional at least).


    Reply With Quote  
     

  13. #152 Re: Dirt cheap mods: my never ending struggle 
    GT Level Member
    Join Date
    May 2012
    Location
    lebanon ohio
    Posts
    339
    Thanks (Received)
    2
    Likes (Received)
    5
    Dislikes (Received)
    0
    Chats
    0
    Lights look good man!
    Reply With Quote  
     

  14. #153 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Quote Originally Posted by 98grand View Post
    Lights look good man!
    Thanks 98grand! Now I just have to fix that hood and bumper and polish the lenses....
    Reply With Quote  
     

  15. #154 Re: Dirt cheap mods: my never ending struggle 
    I break stuff selliott's Avatar
    Join Date
    May 2009
    Location
    Kansas City
    Posts
    1,313
    Thanks (Received)
    2
    Likes (Received)
    10
    Dislikes (Received)
    0
    Chats
    8621
    Too many projects lol, I prefer to fight one forever
    Reply With Quote  
     

  16. #155 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Quote Originally Posted by selliott View Post
    Too many projects lol, I prefer to fight one forever
    Haha you're not wrong... I'm definitely going to buckle down and complete one at least! I plan on taking one of them to the power tour this summer if I can get one done by then. I'm just deciding which one I want! Right now, I'm leaning more towards the fiero since it would be the best gas mileage, plus it would be different.
    Reply With Quote  
     

  17. #156 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Well, speaking of too many projects, got to have "fun" replacing the inner and outer tie rods on the A$$tek along with a host of other issues such as burnt out bulbs, power steering pump, shift lock issues, and the list goes on. Think the only major things that are left are the crack on the windsheild (high enough that it passes inspection, but still bugs me), and the broken glove box hinge (easy fix).

    Still have to track down the oil leak, but the power steering leak has been masking the leak, so I'm hoping that since I replaced the pump, that's the end of one leak at least!

    Starting to sand the hood for the monte now so hopefully next week I can start on the grand prix finally.
    Reply With Quote  
     

  18. #157 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Still battling with work and school to find time to work on the grand prix. I'm really missing driving her. As it stands, I need to clean up the heads, intake and parts in general to go onto the "new" engine, transfer everything, modify the wiring and the fuel and various other things, then program her for the top-swap. Just bought the gauge pillar and the vacuum gauge, going to buy the wideband and gauge, then it's just installing all that and figuring out how to tune without blowing her up! I'll post as soon as I have anything!
    Reply With Quote  
     

  19. #158 Re: Dirt cheap mods: my never ending struggle 
    I break stuff selliott's Avatar
    Join Date
    May 2009
    Location
    Kansas City
    Posts
    1,313
    Thanks (Received)
    2
    Likes (Received)
    10
    Dislikes (Received)
    0
    Chats
    8621
    Not blowing up is a plus
    Reply With Quote  
     

  20. #159 Re: Dirt cheap mods: my never ending struggle 
    GTX Level Member wstefan20's Avatar
    Join Date
    Aug 2017
    Location
    Raytown, MO
    Posts
    1,153
    Thanks (Received)
    33
    Likes (Received)
    63
    Dislikes (Received)
    1
    Chats
    34
    Alright, so I've slowly been amassing parts and I think it's about that time to start on the top-swap!

    Before I get started on that though, I want to make sure my transmission is up to the task...

    It was rebuilt (by me) to stock specs L36 na 4t65e + shift kit + lube tube retainer (I replaced all bushings, bearings, and solenoids too). For now, I'm just going to go stock L67 topswap, with headers, n* intake, cai, 80# injectors, vs cam, ls6 springs, ls7 lifters, possibly meth injection. Knowing me though, I'm going to want to start doing pulley drops though and I really don't want to keep pulling the transmission...

    End goals, I'm not going bigger than the vs cam, probably not doing rocker upgrade, might drop a pulley or two at most on this car since it's my daily. I might "race" for fun a time or two, but no burnouts or drag racing for me.

    So far, this is what I'm thinking of replacing:
    -gxp chains (still rocking the stock ones)
    -sonnax boost valve
    -Raybestos high energy clutches
    -hd differential
    -high stall torque converter
    -afl valve repair kit

    My question, is since it's been rebuilt, do I really need high energy clutches, or should I just stick with the chains, and valve body upgrades? On that note, is the torque converter really necessary? I'm assuming the na one will be too low so might as well upgrade while I'm there. What about the flexplate? I've heard a lot of them have been cracking lately.

    Thanks in advance for the advice and I hope to be re-vamping this thread soon!
    Reply With Quote  
     

Page 8 of 8 FirstFirst ... 678

Similar Threads

  1. cheap do it yourself mods?
    By Ryansgtp in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 11
    Last Post: 08-10-2010, 11:04 PM
  2. cheap mods
    By PNIGZ in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 34
    Last Post: 01-20-2010, 03:19 PM
  3. dirt cheap!!
    By gotboost3 in forum General Tech Discussion
    Replies: 0
    Last Post: 03-07-2009, 01:59 AM
  4. Any Cheap Mods Out There?
    By GTPJOE90 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 20
    Last Post: 08-14-2008, 09:08 AM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •