|
|
12-10-2012
I have a 07 grand prix gt.The service abs and tc light stay on all the time. has two new hub asimblies and speed sensors on it. The wiring appears to be ok does anybody have a clue what it might be. I need help cant keep spending 90 to have the code read.
12-10-2012
90 bucks for a code? dude, go to Autozone/O'reillys/advanced/pepboys/napa and its free to read.
12-10-2012
They dont have the reader to do it at the stores were i live.
12-10-2012
abs scan cost money almost always, its a different kind of scanner. same as a air bag scanner.
any way the last time you had it scanned? what codes did you get? and what did you do so far?
what you can do is jack up each wheel, leave the lugs tight, grab the top of the tire, and push and pull firmly, your looking to feel play in the wheel. if its loose feeling, your hub is bad.
you can also remove the plugs from the hubs, clean them with electrical parts cleaner and then dab some de electrical grease on the plug, and then work the plug off and on a few times to work the grease in.
12-10-2012
Our cars are 4 wheel abs, maybe its one of the 2 you havent replaced.
Do you have the codes from when you got it scanned before and you've been replacing the wrong ones this whole time?
12-11-2012
adamsz28,
I agree with the others, would you please provide the codes.
Feel free to PM me if you prefer.
Louis
GM Customer Service
12-11-2012
it was the code for the front passenger side wheel hub
12-11-2012
sorry, didnt know, good to know
12-11-2012
tried any of those suggestions up top there yet?
and my guess is the pass front hub has been replaced?
12-11-2012
yes both have been replaced
12-11-2012
test the rear hubs? we do have 4 wheel abs. and the back wires/plugs?
12-26-2012
the back is all good
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
