I am changing flex plate but im having difficulty with the fuel rail injector process.... What has to come off and from where im sorry but i got no idea im really trying to save money per myself doing this. Thanks
|
|
04-18-2012
I am changing flex plate but im having difficulty with the fuel rail injector process.... What has to come off and from where im sorry but i got no idea im really trying to save money per myself doing this. Thanks
04-18-2012
You shouldn't have to remove them for a flexplate...
04-18-2012
What about the wire harness that goes to the fuel rail on top of charger?
04-18-2012
Tom...
Pull up sligntly on the green or blue piece, it'll move 2mm or so. Then push in on the tab and wiggle off the injector. The piece you move blocks the tab from being pushed and allowing the clip to release from the injector.
04-18-2012
So basicall i will have a fuel rail with no injectors on and flop rail up when i pull motor?
04-18-2012
That is a possibility. Also possible is to pick up the fuel line release tool (cheap at any parts store) and remove the line from the rail, then leave the rail on the motor.
I read it originally that you needed to get the electrical connector off the injectors.
04-18-2012
Yi think ill pick up the release tool .... Thanks man
04-18-2012
Np...
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
