Thread: o2 Sensor, P0171, Surging Idle

Results 1 to 4 of 4
  1. #1 o2 Sensor, P0171, Surging Idle 
    SE Level Member
    Join Date
    Sep 2019
    Location
    Brownsburg
    Posts
    10
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Car has code P0171 (Bank 1 Too Lean) watching on my scanner the o2 voltage stays at .05 at idle. The exhaust smells VERY rich. So I figured my o2 was bad. Replaced it with a new Denso one and same exact thing. If I rev the car up a bit the o2 starts oscillating properly. The car is modded and has been tuned. Below I have my thought of what could be causing this.


    -Bad Tune (When I bought the car I had a code for bank 1 too rich caused by a bad FPR. If the car was tuned with the bad pressure regulator and now it's been fixed it would be getting too much fuel....???)

    -XPZ Cam Has too much overlap and is allowing raw fuel and air to enter the exhaust at idle

    -Headers have the o2 bung back too far? (Seems unlikely but just a thought)

    Not really an easy solution to any of the things I've thought of so far so hopefully somebody else has better ideas......preferably something that cost me under 5 dollars and is a guaranteed fix.

    Thanks guys
    Reply With Quote  
     

  2. #2 Re: o2 Sensor, P0171, Surging Idle 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    maf could need to be cleaned. vac leak. or th eo2 is bad. id check for vac leaks, then if you dont find any clean the maf.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: o2 Sensor, P0171, Surging Idle 
    SE Level Member
    Join Date
    Sep 2019
    Location
    Brownsburg
    Posts
    10
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Quote Originally Posted by Scottydoggs View Post
    maf could need to be cleaned. vac leak. or th eo2 is bad. id check for vac leaks, then if you dont find any clean the maf.
    I already check for vacuum leaks before replacing the FPR and found none. The o2 is new and I cleaned the MAF when I got the car and did a bunch of other preventive maintenance. Looking at the MAF data while the car is running the output looks ok and goes up and down pretty smoothly with the RPM although I dont exactly know what to look for. Its a northstar MAF as well

    Sent from my SAMSUNG-SM-G891A using Tapatalk
    Reply With Quote  
     

  4. #4 Re: o2 Sensor, P0171, Surging Idle 
    Donating Users bandook's Avatar
    Join Date
    Apr 2015
    Location
    Columbus, OH
    Posts
    1,781
    Thanks (Received)
    2
    Likes (Received)
    27
    Dislikes (Received)
    0
    Chats
    246
    Under 5 bucks, clean your battery terminals. Crazy but i've seen that help others with that code. Otherwise search this forum "p0171 billboost37" He had that code and went through about everything trying to fix it.
    Top Swapped 01 Imp
    VS (very small?) cam, SD Headers, 2.8" pulley, 29°, ported everything, E85, AEM water/meth, Deka 60's, HPT tuned
    Reply With Quote  
     

Similar Threads

  1. P0171 and P0300 Codes, Mildly Rough Idle, Rough on starts, Slightly Elevated Idle
    By nskyline34 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 26
    Last Post: 07-17-2021, 07:49 PM
  2. 2000 Grand Prix GTP Supercharged, Idle surging and stalls at idle
    By Regval in forum General Grand Prix Discussion
    Replies: 10
    Last Post: 11-09-2017, 04:41 PM
  3. Engine Light on code P0171, IDLE SURGING!
    By balzi in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 5
    Last Post: 05-07-2013, 01:51 PM
  4. O2 Sensor not working... P0171 new sensor still no data from O2?
    By Z34Phoenix in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 8
    Last Post: 05-16-2012, 12:20 PM
  5. Please Help!!! GTP surging idle
    By Damon318 in forum General Tech Discussion
    Replies: 40
    Last Post: 10-26-2010, 01:05 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •